Setting up Caterpillar Communication Adapter

Requirements 7X1700
– Caterpillar Communication Adapter Group

You may use the 7X1701 Caterpillar Communication Adapter; however, it is no longer available for purchase from Caterpillar.

Also requires:


To set up the Communication Adapter, perform the following steps:

Step 1
Connect the 7X-1425 RS232 cable to an available Serial Port on your PC and to the Service Tool connector on the Communication Adapter.

Step 2
Connect the 139-4166 Unicable to the Control connector on the Communication Adapter and to the service
connector on the product that you are servicing. You are now ready to start your Car Diagnostic Tool.

Caterpillar Communication Adapter (7X1701) does not support J1939 data link.

MPSI Pro-Link? 9000 (only for On Highway Truck engines and certain commercial applications) This package also requires the following equipment:

MPSI PC/Terminal Cable
MPSI Caterpillar Cartridge (version 1.07 or greater)

If programming a 3126 HEUI, it is recommended you disconnect the power to the Allison transmission and re-connect with Pro-Link.

Perform the following steps to set up the Pro-Link 9000:

Step 1
Insert the MPSI Caterpillar Cartridge in the Pro-Link?9000.

Step 2
Connect the Pro-Link 9000 to your PC’s serial port using the MPSI PC/Terminal cable.

Step 3
Connect the Pro-Link 9000 to the product and turn the ignition key of the vehicle on to power the Pro-Link.

Step 4
Select Pro-Link from the main menu or push the “Func” key to recall data if no engine data is received.

Step 5
Select the Com Adapter Link function from the Pro-Link menu, and push “Enter” to initiate the Com Adapter Link mode. The Pro-Link will display a screen showing that the Com Adapter Link is active. You are now ready to start the Caterpillar SIS.

Software Activation – Cat ET and SIS DVD

Software Activation – Cat ET and SIS DVD

-> Software users MUST be assigned an Activation ID that will license their copy of CAT SIS and SIS DVD
-> After software is installed, the Activation ID must be installed to Activate the software Software may be licensed Online or Manually
Online is the PREFERRED Method
-> Manual licensing forces the user to obtain a file via the Internet during the process

Online Service Software Activation

-> Instructions for the Activation of Cat ET and SIS DVD service software follow the same format.
-> The examples that are shown in this presentation represent the Cat ET procedure.
-> Please follow the same process for SIS DVD.

Online Activation – Cat ET

10-1 10-2 10-3 10-4 10-5 10-6 10-7

Manual Service Software Activation
-> Instructions for the Manual Activation of Cat ET and SIS DVD service software follow the same format.
-> The examples that are shown in this presentation represent the CAT ET procedure.
Please follow the same process for SIS DVD

Manual Activation – Cat ET

10-8 10-9 10-10

Manual Activation – Cat ET
-> Dealer License Administrator uses DSL to send Manual_Request.xml file to License Security Server
-> Dealer License Admin generates Response File and saves response.xml Response File to Flash Drive or other device
-> Automotive Scan Tool Cat ET User Loads response.xml file Response File on User’s PC
-> Service Software application prompts user to accept the license in order to install the Activation ID onto PC
-> Application is enabled with the proper level of functionality
-> License is enabled for 365 days
-> Manual licensing forces the user to obtain a file via the Internet during the process

Manual Activation – Cat ET

10-11 10-12 10-13 10-14 10-15 10-16 10-17

Caterpillar Electronic Technician Documentation

An electronic copy of Caterpillar Electronic Technician Getting Started is included on the current service tool Install CD-ROM.

To view or print this manual, you must first install Adobe Acrobat Reader version 4.0 or greater. Adobe Acrobat Reader version 4.0 is also included on the CAT Electronic Technician Install CD-ROM.

To install Adobe Acrobat Reader:

Step 1
Insert the Install CD-ROM into your computer’s CD-ROM drive.


Step 2
In Explorer, select your CD-ROM drive.

Step 3
Select the Adobe Acrobat Reader file folder.

Step 4
Select the rs405eng.exe file. This installs Adobe Acrobat Reader on your PC.  For more information about Adobe Acrobat Reader, view the Reader.pdf file.

Trainer runs the service tool in a training mode. This allows you to become familiar with the service tool without needing to be connected to an Electronic Control Module (ECM) or Communications Adapter.There is no charge for Trainer, and authorization is not required. Instructions

Using Trainer:  

Step 1
Select CAT ET from the Programs menu, and then select Electronic Technician from the submenu. The Connection message box is displayed.

Step 2
Press the “Stop Connect” pushbutton. The service tool main screen is displayed.

Step 3
Select Trainer from the Help menu, and then select Enable from the submenu, or push the Enable Trainer icon on the toolbar (if default is set). The Trainer dialog box is displayed


Step 4
Select a product from the Application drop-down list.

Step 5
Press “OK.” The Connection message box is displayed. The ECM Summary screen displays in the trainer mode. Trainer simulates some of the service tool functions.

Press “Cancel” to exit Trainer. You will return to the service tool main screen.


When you are in trainer mode, “Trainer Active” displays on the Title Bar.

To change the product simulated within Trainer:

Step 1
Select Trainer from the Help menu, and then select Properties from the submenu. The Trainer dialog box is displayed.

Step 2
Select a different product from the Application drop-down list.

Step 3
Press “OK.” The Connection message box is displayed. Then the new product is displayed.


To exit Trainer:
Select Trainer from the Help menu, and then select Disable on the submenu, or push the Disable Trainer icon from the toolbar (if default is set).

What’s New allows you to view a list of new functions and major enhancements available in the installed version of the OBD2 Scanner.

What’s New launches your browser when it is selected from the Help drop down. What’s New is displayed in the language selected as default in the Select Default Language dialog box during the installation of your service tool.


To view the What’s New screen, select What’s New from the Help menu

How to Install Ford IDS V108.01 Full without Activation

Latest Ford IDS V108.01 Full Software for Ford VCM II support online programming released on Jan. 2018.

Software Version: 108.01, no need activation

Operating system: Windows XP/Windows 7 32/64 bit



Tested with all VCM2 SP177 series,  Ford VCM2 2-in-1 clone and VXDIAG VCX NANO Ford: Never failed!!

Online programming: Supported! but you should have an account yourself.

Ford IDS v108.01 function: Confirmed!

1.Able to download the very latest calibration files/software from Ford server if the network connection available at the time of connecting to vehicles

2.Read and decode fault codes

3.Delete fault codes

4.Display System current parameters in digital form

5.Combined displaying of data

6.Logs Keeping: write and keep of digital parameters in memory

7.Special functions: changing of permissible seeting of blocks, programming etc.


Q: Whether it can work with Ford VCM 1 Clone?

A: Yes, it can work with Ford VCM 1 clone

Q: Is this vmware or native

A: This is native, install on new and clean windows xp/7

How to install Ford IDS V108 step by step?


1. Please backup the important files on the desktop and disk C because the next operation will cover the content in the disk C.

2.Disable both local area and wireless network connection

3. If your computer hard drive only has one partition, please prepare a 16 GB U flash drive, if has 2 partitions, please unzip the software of CD into another partition except disk C

Step 1: Recover System
Open Software D (Disk D)

Create new folder Ford 108

Copy all zip file on Ford 108-2 software CD to Ford 108 folder
Eject Ford 108-2 DVD-ROM to DVD/CD-RW Drive

Copy all contents to Ford 108 folder again
Extract ford108.part01 zip files to Ford 108 folder

Then delete all other zip files, ford108.part01-ford108.part33
(only 3 files left)
Open Ghost 8.0

Recover system, choose destination D:/Ford 108/ford108.GHD
Restart computer and recover system


Step 2: Install Ford IDS 108 Setup


Run Ford Module Programming Limit as Administrator
Ford Extension Success, press OK
Module programming has been extended to 2018/05.26

Click on Start menu->All Program->Bosch->VCM Manager (Ford-VCM-II)
If system prompt PC software initialization error, press OK to ignore
Open Disk C/Progam Files/Ford Motor Company->IDS->Runtime->install3rdparty->
ETAS, Run setup as Administrator



Install Bosch VCI software Ford VCM II

click Next
Select Remove Bosch VIC software from your computer, click Next

Press Remove
Click Finish
Again run setup as Administrator
click Next

Ready to install the program
Click Finish

Install setup completed.

Step 3: Make Connection
Click Start menu->VCI Manger (Ford-VCM-II)

Connect VCMII with computer follow the diagram below

Open Computer->Manager->Device Manger->Network adapters->ETAS VCI USB RNDIS Device
to check connection is built


Open Network and Sharing center->Change adapter settings
Make sure you have disable both local area and wireless network connection


Step 4: Run software

Open Ford IDS v108 software on desktop


Network test, gathering vehicle data

check language options, programming modules and options




What You Need To Run Caterpillar Electronic Technician

Caterpillar Electronic Technician (CAT ET) is a service tool designed to run on a personal computer (PC) under Microsoft Windows.

All service tool documentation assumes the user has some Microsoft Windows experience. if this does not describe you, please take some time to acquaint yourself with Windows 2000, or Xp before installing your service tool.

The data and menus displayed in the illustrations of this manual may be different from those displayed in your service tool. This is because there are many different Electronic Control Modules (ECMs) serviced with Caterpillar Electronic Technician.

What You Need To Run Caterpillar Electronic Technician

To run your service tool, you will need to meet the following PC Requirements, communication hardware, and cables.

Note: The CAT Electronic Technician should not be used as a standard when buying new personal computers to run the service tool. if you have existing equipment that meets these minimum requirements, it will run your service tool.

MAN cats T200 malfunctions


MAN T200 is the latest original diagnostic tool designed for maintenance of trucks, buses and other heavy vehicles made by MAN. This tool works with original MAN diagnostic software MAN CATS II (version 11.01).

MAN T200 supports very wide range of MAN vehicles due to compatibility with older vehicle models and older diagnostic protocols and due to compatibility with vehicles equipped with CAN BUS diagnostic system. T200 helps you maintain almost all MAN vehicles at your workshop. Suitable for large MAN services and small workshops. T200 comes in kit with necessary cables, notebook PC and original diagnostic software (installed on PC).

Heavy Duty Diagnostic MAN cats T200 malfunctions, which repair malfunctions in the brains, how to repair failures, parts numbers and locations on parts of MAN vehicles, how to find out what way should be taken when problems are encountered, and how to exchange information about the problem in the vehicle with this description detection device is a unique and unique product designed for use in MAN vehicles for services in accordance with the instructions sent by car.

Languages Supported: German, English, French, Spanish, Italian, Norwegian, Finnish, Portuguese, Danish, Dutch, Polish, Russian, Croatian, Turkish, Romanian, Greek, Czech, Swedish, Hungarian, Slovenian, Chinese, Korean, Bulgarian. Supported systems

How to use a OBD2 Scanner 2018


Learning to use a good automotive OBD2 Scanner is one of the best ways you can continually invest in the health of your car. In addition, it can help you in protecting hundreds or thousands of dollars in auto maintenance. The OBD2 scanner is the second version of the On-Board Diagnostics, which monitors engine functions.

In the event of a problem with the engine, the “Engine Check” light appears. The OBD2 scanner can access the resulting crash codes in the vehicle’s diagnostic computer or even the train control module. This handheld computer can simply connect to the media stated in 1996 and later. Early cars use old diagnostic techniques that vary according to the manufacturer of the vehicle.

OBD2 scanning engines can be used by any car owner plus a whole array of costs and functions. Professional mechanics are more likely to reach the general reader. Regardless of the type of person reading the code you have the way it really is used is pretty much the same.

How to use OBD2 Scanner tips

First, you will need the cable to connect to the scanner or PC with the OBD2 software system. Most scanners are universal because they will read the most popular codes, but some of these may only use certain types of vehicles so make sure that the scanner you are working with is the most common your Car. Make sure the car’s engine is turned off before linking you.

Locate the OBD2 system connector plug location. If your vehicle certainly complies with the OBD2 protocol, it has a 16-pin sub-connector that is usually close to the center console for the driver side. Different vehicles may have different positions, such as under the steering wheel, behind the ashtray, between the front seats or under the driver’s seat. Instant online checks will help you find the location for the particular car in case it is not easily noticeable.

Check the connection plug of a particular vehicle to ensure that all the necessary pins can be found. Almost all of them are 4 plus 5 pin for grounding and 16 pin for power supply.

Connect your OBD2 scanner to your car’s computer. Wiring your 16-pin connector at one end should hang up the women’s port on your car. Connect the other end of the cable to your scanner afterwards.

An alternative to a handheld scanner is to connect to a computer that has an OBD2 software system attached to it. You will need a wire with a 16-pin connector with one end attached to another USB port to attach to your computer. Bluetooth connectivity is possible so that this application is also possible.

Once you have connected it can take a short amount of time for the reader to initialize. Your scanner can check your car’s computer to find out what protocols are often needed as well as make connections. Specific scanners read the error codes stored in the car’s computer and displayed on the screen.

To explain the specific code you may have to seek advice from the manual for the automobile although some scanners provide information for the underlying code. Some scan device manufacturers provide inputting applications that will translate program code and provide repair procedures that are defined on that code.

Step by step to properly use the OBD2 scanner

how to connect obd2 scanner to DLC

Step 01: Make sure the car is turned off. Locate the data link underneath the steering wheel. It’s a wall outlet that allows the use of a special diagnostic computer, which most vehicles are sure to drive.

Step 02: Connect the OBD2 scanner to the Data Link Connector. The scanner cord in a 16-pin plug should match the natural socket.

Step 03: Insert the car key into the ignition cylinder and change it to “On”. For brand OBD2 equipment, you need to turn on the engine and invite it to idle.

Step 04: Turn on these devices, if this does not automatically activate itself.

Step 05: Enter the command to “read” or even “scan” the system diagnostics. How exactly to do this depends on the brand of the OBD2 device you are using. The design button changes from design to model, plus some devices can work with a menu system. A guide to getting the correct code will be in your device’s manual.

Step 06: Read through the hassle code on the reading screen of your device. Duplicate the code types down on a sheet related to paper. Some devices come with a USB port and can be connected directly to certain types of computers via USB cable. If you have this experienced OBD2 scanner, connect the device between the desktop in the scanner’s manual.

Step 07: Find the trouble code in your device’s manual. Often, generic OBD2 codes can be found in an annex on the back. These are general requirements that are standardized for all OBD2 cars. Manufacturers also have a new supplement. Customer’s guide will not have these types of codes. You will have to search them on the web or in a maintenance manual for the particular vehicle.

Step 08: Transform the vehicle’s electrical system. In case you have to start the engine, turn it off. Disconnect the OBD2 scanner’s diagnostic cord to the socket and turn off the device.

Finally, I think the above tips will help you use the OBD2 scanner appropriately. Therefore, it is important that the Professional Car Diagnostic Tool is usually a great device to withstand your will. In case you are an expert in repairing mechanical problems or simply want to know something along with your car (rather than being cheated by the dick seller) then self I work and get today. The amount of money you can keep for long periods of time will not be a substitute.

Which Auto Scan Tool Is Best


What is a scan tool?

Best Professional Car Diagnostic Tool is used to diagnose and detect variety of internal problems or malfunctions that can occur within your vehicle. These codes give you incite as to what is wrong with the car and where the problem is located. There are three different types of OBD scanner devices.

The first is your basic code reader; this model is good for reading and clearing codes.

The second is a more advanced automotive scan tool that can view live and recorded data, provide access to bi-directional tests and controls, access extensive knowledge bases, and other more advanced functions. Lastly, factory scan tools which are made specifically for the original equipment manufacturer and covers all vehicles manufactured under that company.

Your basic code reader will normally only have a couple buttons and cost you anywhere between $50-$100. It will be fine for reading standard diagnostic trouble codes and clearing them, but will not have vehicle specific or enhanced codes that a more advanced scan tool would have. A more Advance Engine Diagnostic Tool can run you anywhere from $1,000-$12,000 depending on the features, adapters and cables that may be bundled with it; but it’s functionality is far superior to your basic scan tool. There are also factory specific scan tools available that get up there is cost but may be worth it, depending on what you or your shop deals with on a daily basis.

Choosing the right Scan Tool

As with cars, there are many different options and tiers available when choosing a scan tool. You need to consider the ability to work on pre OBD–II vehicles, screen size and resolution, bundling options, bluetooth capabilities, platform needed, onboard memory, as well as, battery life and power source. For example, if you work on classic or antique cars you will want the ability to work on pre OBD-II vehicles. If you want to fine-tune your cars performance you’ll need a more advanced scan tool. It all depends on what you intend on using it for. The next time you are in the market for scan tool check out for a wide variety of options and factory specific models.

Is MS908P Worth Buying

Is MS908P Worth Buying

1. Its quad-core processor, the Cortex-A9 Samsung Exynos 1.4 GHz, provides high processing speeds.

2. The compatibility of the device with other add-ons makes it possible to install a language pack.

3. The scanned data is presented as texts and/or graphs.

4. The device is compatible with a large number of vehicles.

5. Android Ice Cream 4.0 on which it runs enables multitasking and quick boot up. Almost 5 times faster than other diagnostic devices.

6. It is light, compact and robust. Therefore, you can carry and work with it anywhere without much hassle.

7. You can share data via Bluetooth and Wi-Fi with other people in your team or print for hard copies.

It’s one of the best Professional Autel Scanners!!

Why Autel MaxiSys Pro MS908P?

This diagnostic device is mainly for professionals, those with Garage or Auto Repairing Shops. It wouldn’t suit you if you are a single car owner. The design is meant to serve many people.If you are an owner of a garage or car shop Autel Professional OBD2 MS908P, it could be of great help to you in getting things done fast.

Is It Worth Buying Then?

Autel MaxiSys MS908 Pro is an all round and powerful tool that I would definitely recommend to any professional mechanics in the auto-repairing business.

It can a long way in easing up and increasing efficiency in your engine diagnostics from all the features mentioned. The returns are a guarantee.

It is a current tool that is compatible with most vehicles models. With its ‘Future Proof’ feature, it is to remain relevant with new vehicle models being released.

Autel Scan Tool are very good with after-sale services and you are assured of getting updates every time they are done.

How to Solve the Problem for GM MDI

There have many situations cant use GM MDI , when you have some troubles to use the tool ,  you should reboot the MDI software and do the Self Test first . Please check the bellowing 4 issues for GM MDI :


If you meet this problem, it indicates that there is an internal problem in the MDI, you need to connect the MDI to a PC by using the USB and do the software recovery procedure or you can contact your local customer support center for help.



This condition indicates that during power on, there has detected a problem. And the solution is to power down the MDI and verify that it has the same problem after you power up again, then connect the MDI to a PC by using the USB and do the software recovery process. Ask your local customer support center is ok.



Normally speaking, Once the external power is applied,the MDI should power up. If the MDI from CnAutotool does not turn on, the first thing you need to do is to check the wall plug or power cable connections. Then try to supply power to the MDI from the two different power sources, the vehicle DLC connector and the AC 12-volt Adapter.


To solve this problem, you need to check and make sure that the cables are all attached to the MDI securely and the connector pins are all clean. If you are going to connect to the vehicle DLC connector, try to power from the AC 12-volt Adapter. And if you are going to connect to the AC 12-volt Adapter, you should try to power from the vehicle DLC connector. If your MDI still can’t power up, then you may have a problem with your MDI, you’d better contact with your local support center.



Actually, after it is disconnected form the vehicle, the automotive scan tool MDI should stay on for a factory set time unless you press the power button. If the MDI turns off immediately once you disconnected it from the vehicle, you should power up the MDI and verify that it has the same problem when the power is removed, then replace the batteries and make sure they are properly installed. After these operation, if it still fails to be off correctly, your MDI may be damaged.


Any other issures for GM MDI Diagnostic Tool , welcome to contact us for technical support any time

Thank you