XTool X100 Pad3 (X100 Pad Elite) and XTool XC501 program Audi 2014 A4L new key step by step.
The left key is original key, the right key is new key
Enter into XTool X100 Pad3 (X100 Pad Elite) main menu, click “diagnosis”, Choose “Audi” and Agree,
Click 4th/5th Immobilizer system
Insert Original Key to ignition switch,Click OK
Click “5th Immobilizer system” and Click Match the key
Click Read Immo Key Data
Enter Filename, and Click OK, and then read immo key data completed. Click OK.
Click “Show Immo Data” , Data including VIN number,keys number are displayed,Click OK.
Click Make Dealer Key
Connect and Power on Xtool KC501
The left key is original key, the right key is new key
Put the new key to key slot of KC501
Click OK
Make dealer key success,Click OK
Click Match the key,enter the total key numbers 2 (original key + new key), Click OK
The Dashboard Show 1/2 Now
Remove original key from ignition,Insert the new key to ignition,the dashboard show 2/2 now
The new key has been programmed successfully
www.cnautotool.com
Leave a Reply