What is Nissan Consult 3 Plus?
Nissan Consult 3 Plus is a diagnostic software special for Nissan,support all the models of the Nissan Diagnostic Tools and Infiniti from 1996 up till now, with all Consult II & III functions.It can support all Nissan car,Infiniti carand Nissan GTR.
Nissan Consult 3 Plus Functions List:
Supports ECM reprogramming on most 1999 model year and later and some TCM and ABS/VDC reprogramming.
Supports blank ECM and TCM programming.
Supports ECM reprogramming on most 1999 model year and later and some TCM and ABS/VDC reprogramming.
Supports blank ECM and TCM programming. September 2013 Nissan and Infiniti began the phase-in of “blank” service part ECMs and TCMs. Depending on the model and model year, replacement modules come WITHOUT software. When the replacement module is installed in an applicable vehicle for any reason, it will need to be programmed.
Optional Security Card-Type A Kit must be approved security professional to purchase
Nissan Consult 3 Plus Specifics:
PC Based: PC Require
Model Year Coverage: The Consult-III Plus is required for all 2013 and newer Nissan and Infiniti vehicles. In addition, the Consult-III Plus is required for all: 2011 and newer Nissan LEAF, Quest, and Murano CrossCabriolet vehicles; 2012 and newer Nissan GT-R and NV vehicles; and 2012 and newer Infiniti M and M Hybrid vehicles. The Consult-III Plus software is continuously being updated to accommodate new vehicles as well as older model years dating back as far as 1996.
PC Recommended: Nissan Specific, Panasonic Toughbook
Nissan Consult 3 Plus Support Car Models:
Diagnostics:for all Nissan,Infiniti,GTR
Immo and Smart key:for all Nissan,Infiniti,GTR
Nissan GTR: for Nissan GTR Diagbostics and Immobi
Electromobiles car:for Nissan Electromobiles car Diagbostics and Immo
Nissan and Infiniti from 1996 up till now
Note:Consult III Plus – 1996MY up
Nissan Consult 3 Plus Support Languages:
English, Portuguese (Newly Add), French, German, Spanish, Italian, Japanese, Russian, Finnish, Greek, Chinese(Simplified), Chinese(Traditional)
Nissan Consult 3 Plus Installation OS Requirement:
Operating System Environment
* Windows: Windows? 2000, Windows XP, Windows Vista, Windows 7, 8 or 8.1
* Mac: Macintosh 8.x, 9.x, OS X
* Disk Storage: 10 MB available hard-drive space
* Display Resolution: 800 x 600 pixels (1024 x 768 recommended)
Nissan consult 3 FAQ:
Q1: What is the difference among Nissan consult 3, consult 4 and Nissan consult 3 plus? Can Nissan consult 4 remap ECU and change IGN time-limited parameter?
A1:
1) Nissan consult 3 and consult 4 share the same software version and parts, the difference between them is the appearance and the quality;
2) Nissan consult3 plus is the newest-released Nissan diagnostic it supports the Nissan up to 2018 year. And only Nissan Consult 3 Plus can support programming.
Q2: What additional card needed when use Nissan Consult-3 plus to make key?
A2: It need additional card, it needs for making key, this card is Nissan Consult-3 plus Security Card, otherwise the button “Immobilizer key” is gray color and is unavailable
Q3: Can i use this nissan consult 3 plus to program tcm and bcm?
A2: Yes, but you need to have the program file.
Q4: Does your Nissan consult 3 plus contain Battery registration card?
A6: No, it doesn’t.
Q5: Do you have any instruction for software installation?
A7: Yes. There is the software installation video on our website. There is the software installation manual in the package too. You can follow them to install the software. Attention: Nissan consult software must be installed on XP system.
Q6: Can i use your nissan consult 3 to program tcm and bcm?
A8: This nissan consult 3 plus support this two function. But if you want to use this two function, you need have the programming file by yourself.
Leave a Reply