CAT Caterpillar ET Diagnostic Adapter III 2015A is the latest and best special Caterpillar diagnostic tool. It supports not only Articulated Trucks, but also different heavy duty like Backhow loaders, Compactors, Excavators, Forest Products, Ming Equipment, Motor Graders, Off-Highway Trucks, Paving Products, Scapers, Skid Steer Loaders, Telhandlers, Track Loaders, Track-Type Tractors, Wheel Dozers, Wheel Loaders, Engines/Power Systems etc. It is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a
CAT engine on dual datalinks.
The installation of CAT III 2015A is very easy:
1. Install CP210X USB to UART Driver
2. Install ET 2015A v1.0.exe.
3. Run ET 2015A _Active.exe
4. Run Network SISID.exe,select the second option as the Choose Adapter, and change the Serial ID into :A4 DB 30 7A 1E D2 .
5. Run Cat ET2015A Patch And Hardware Test.exe to Apply Serial to active network.
Notice: If win7 system, Run Network SISID.exe as administrator
6. My Computer-Manager-Device Manager-Ports(COM & LTP)-Silicon Labs CP210x USB to UART Bridge(COM4)-Port Settings-Bits per second-115200-OK
7. Run 2015A Electronic Technician program on the desktop-Caterpillar Comm Adapter II(Dual Data Link/Serial IP)-COM 4-Advanced Communication Setting-115200-OK
You can check our CAT ET III installation video on the description too:http://www.cnautotool.com/goods-317-CAT+Caterpillar+ET+Diagnostic+Adapter+III.html. If you still meet any installation problem, we can help you remotely check by teamviewer.
Leave a Reply