OBDSTAR X300 DP Plus Program 2020 TOYOTA AVALON 8A-AA Smart Key

With OBDSTAR CAN Direct Kit, X300 DP Plus can read IMMO data, make simulated card and add keys with free pincdoe to 2020 TOYOTA AVALON like a charm. It’s easy to connect the vehicle, no need to remove the ECU from the car to the workbench to read data.

 

OBDSTAR CAN Direct Kit overview:

With the development of the automobile industry, more and more vehicles are equipped with gateway modules for communication safety. Therefore, CAN DIRECT KIT is specially designed by OBDSTAR for reading ECU data of gateway vehicles. Split design makes it easy to connect with more ECU cables, like COROLLA 4A cable.

(Note: If reading data of a gateway vehicle by an OBD diagnostic connector, it will be blocked!).

 

Support Car Models:

2019- COROLLA 4A proximity key programming (free pincode);

2021- COROLLA CROSS 4A proximity key programming (free pincode);

2021- COROLLA CROSS HV 4A proximity key programming (free pincode);

2021- COROLLA SPORT 4A proximity key programming (free pincode);

2021- COROLLA SPORT HV 4A proximity key programming (free pincode);

2021- COROLLA TOURING 4A proximity key programming (free pincode);

2021- COROLLA TOURING HV 4A proximity key programming (free pincode);

2021- COROLLA HV 4A proximity key programming (free pincode)

2019- LEVIN 4A proximity key programming (free pincode);

2021- LEVIN HV 4A proximity key programming (free pincode);

2021- ALLION 4A proximity key programming (free pincode);

2021- LIVIN 4A proximity key programming (free pincode).

2018- TOYOTA CAMRY proximity (8A-A9) key programming (free pincode)

2018- TOYOTA C-HR proximity (8A-A9) key programming (free pincode)

2018- TOYOTA IZOA proximity (8A-A9) key programming (free pincode)

2018- LEXUS RX450H proximity (8A-A9) key programming (free pincode)

OBDSTAR CAN DIRECT KIT User Manual

 

All devices required:

OBDSTAR X300 DP Plus (Key Master DP Plus)

Main cable

OBDSTAR CAN Direct Kit (CAN Direct+ TOYOTA-27)

OBDSTAR Key SIM 5 in 1 Key Simulator

 

Operation steps:

Connect Toyota-27 with IMMO smart box

Connect CAN Direct to the vehicle OBD and X300 DP Plus

Connect device to internet and make sure the internet connection is normal during the whole process

 

OBDSTAR X300 DP Plus menu function path:

CAR IMMO>> Asia>> TOYOTA LEXUS SCION>> TOYOTA LEXUS SCION V32.72 (newest software version)>> Manual Select System>> PROXIMITY>>TYPE 9 (8A-AA)

 

Step 1: Read Immo Data

Select Operation In the Car (CAN DIRECT KIT)

Confirm the internet communication and device connection are good

Read Immo data automatically

Save the data and confirm the value input

Operation success

 

Step 2: Make Simulated Card (Key SIM)

This function can make simulated key when all the keys are lost (Note: simulated key needs to be kept charged, and it needs to be made again after the power is off);
The simulated key can replace the original car key to add keys, erase keys and other operations;
Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.

Press Enter to continue

Select the original immo data just saved to get key information

Connect Key SIM simulator

Generate simulated card successfully

Then move the simulated card close to the start button and try to light the meter. If you can light up the meter normally, use the simulated card instead of the original key for the (Add smart key) operation.

Restore the IMMO smart box cable

The simulated key makes engine started successfully

New keys can be added by OBDSTAR X300 DP PLUS key programmer with CAN Direct Kit via IMMO data files with free Pincode as well.

Be the first to comment

Leave a Reply

Your email address will not be published.


*