Here’s the easy steps to change Xentry language of VXDIAG Multi tool and VXDIAG Benz C6 DoIP diagnostic systems.
In Xentry software, press Setting icon
Go to System Settings
General->Setting Language
Select the language you desired
Multi-language available: Bulgarian/ Danish/ Greek/ Spanish/ French/ Italian/ Korean/ Polish/ Romanuan/ Serbo-Croatian/ Turkish/ Czech/ German/ English/ Finish/ Hyngarian/ Japanese/ Dutch/ Portuguese/ Russian/ Swedish/ Chinese
How-to: Benz W205 N3/10 online scn coding of control unit motor electronics MED40 for combustion engine M274 using VXDIAG Benz C6 xentry.
Procedure:
Connect VXDIAG C6 Benz vcx plus with vehicle and computer
Turn on ignition switch
Run Xentry software in VX Manager
Go to Diagnostic function
Confirm safety information and press Continue
Check N3/10 control unit version
Check if fault code exists, if yes, clear error codes.
Actual values
Go to Adaptations->Control unit update-> Updating of SCN coding
Enable online connection for the next steps
Coding of control unit MED40 for combustion engine M274 in process
Resetting control unit by VXDIAG C6 Benz
Switch off ignition then switch ON
Check variant coding
MED40 control unit coding complete
Enter repair order number
You are allowed to print the order report.
Done.
VXDIAG BENZ C6 for Benz Function Introduction:
Benz software include two versions of PASSTHRU & PDU, including DAS, Xentry software. Version of PDU support new car models of 222, 213, 205 etc, other car models need to usepassthru version to diagnose. Not support old models of 210, 203, 220 with K-Line communication. It support connections of WIFI, LAN and USB.
Compatible Software: VXDIAG XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
vxdiag-benz-c6-doip
VXDIAG Xentry Diagnostic VCI for Benz Product Features:
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems
AllScanner VXDIAG C6 DOIP Summary:
The new VXDIAG For XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
Notice :
1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2.You also can watch more videos to get more technical support from official website: http://www.vxdiag.net
3.This VXDIAG can/’t support All Key Lost,needs one key at least.
PC Requirement:
Processor: Pentium 4 / 1.6GHz+.
Memory: 1G Bytes or more.
Hard disk: 40G or more.
Display: Resolution 1024×768 or higher.
Network interfaces: LAN 10 / 100M or 802.11b / g.
Communication Interface: USB2.0 or USB3.0