Nissan consult 3 plus free download – ECU programming works

Nissan Consult 3 Plus features:

– Update support ECU programming without immobiliser card (old version does not support programming)

– Perform diagnosis and programming till year 2016.

Nissan Consult 3 Plus works on:

Nissan Consult-3 plus (Nissan consult 3+) work for all nissan car, infiniti car and nissan gtr car to 2016.
Nissan Consult-3 plus work with obd-16 connector for the new kind of car, work with 14 pin connector for the old Nissan.
Nissan Consult-3 plus support Nissan car electronic system diagnostic
Nissan Consult-3 plus support Nissan electromobiles such as Leaf.
Nissan Consult-3 plus support all Renault diagnosis.
Can calculate the security code for the new cars till year 2016 with NISSAN Password.

Note: Nissan Consult iii Plus support key programming as well,but you need to buy immobiliser security card to work with.
Nissan Consult 3 Plus

Nissan Consult 3 Plus V72.13 installation:

Step 1: Click Consult-iii-* setup.exe

Step 2: Just show Nissan Consult III Setup Wizard
Step 3: Choose the installation path of Consult III Step 4: click Install Consult III software Step 5: wait for the Installshield Wizar
Step 6: Choose: accept the terms of Nissan Consult License agreeme nt

Step 7: Choose North America market(NAM), click next
Step 8: Choose North America

Step 9: choose U.S.A
Step 10: you also can choose others language

Step 11: the installation of Consult – III software succeeded
The installation guide of Nissan Diagnostic Tool Nissan Consult III USB drive Connect the Consult III firmware with your pc by USB cables, and connect the Consult III hardware with your car via OBD-II 16pin diagnostic plug, supply 12V power to Consult III firmware.

Step 1: Found New hardware( Nissan Consult III) Wizard, choose “Yes, this time only”
Step 2: Choose Install the Consult III software automatically

Step 3 Choose JCI-iB-Alliance vehicle interface, just click next
Step 4: just click finish, completing Consult III hardware drive installation
  How to Crack Nissan Consult III software, and configure Consult III software

Step 1: Open Consult III software on desktop
Step 2: perhaps show these error: there are no registered VI/MI, please contact your administrator, just ignore, click “OK”

Step 3: click “SUB” button

Step 4: click Administrator setting
Step 5: input Consult III Password — nissanconsult3
Step 6: Choose VIMI registration

Step 7: Input Consult III VI serial number: 926573, and click: set

Step 8: Click the home button
Step 9: then click: “Connect” button
Step 10: the Consult III will found hardware, show: checking the firmware version

Step 11: choose the Function of Consult III software, just enjoy it

Add a Comment

Your email address will not be published. Required fields are marked *