(Free Download )Nissan consult 3 plus V72.13 – ECU programming works

Nissan Consult 3 Plus features:
– Update support ECU programming without immobiliser card (old version does not support programming)

– Perform diagnosis and programming till year 2016.

Nissan Consult 3 Plus works on:

1.Nissan Consult-3 plus (Nissan consult 3+) work for all nissan car, infiniti car and nissan gtr car to 2016.
2.Nissan Consult-3 plus work with obd-16 connector for the new kind of car, work with 14 pin connector for the old Nissan.
3.Nissan Consult-3 plus support Nissan car electronic system diagnostic
4.Nissan Consult-3 plus support Nissan electromobiles such as Leaf.
5.Nissan Consult-3 plus support all Renault diagnosis.
6.Can calculate the security code for the new cars till year 2016 with NISSAN Password.

Note: Nissan Consult iii Plus support key programming as well,but you need to buy immobiliser security card to work with.

Cnautotool.com Nissan Consult 3 Plus V72.13 installation:
1.Click Consult-iii-* setup.exe
2.Step 2: Just show Nissan Consult III Setup Wizard
3.Step 3: Choose the installation path of Consult III
4.Step 4: click Install Consult III software
5.Step 5: wait for the Installshield Wizar
6.Step 6: Choose: accept the terms of Nissan Consult License agreement
7.Step 7: Choose North America market(NAM), click next
8.Step 8: Choose North America
9.Step 9: choose U.S.A
10.Step 10: you also can choose others language Step 11: the installation of Consult – III software succeeded

The installation guide of Nissan Consult III USB drive Connect the Consult III firmware with your pc by USB cables, and connect the Consult III hardware with your car via OBD-II 16pin diagnostic plug, supply 12V power to Consult III firmware.
1.Step 1: Found New hardware( Nissan Consult III) Wizard, choose “Yes, this time only”
2.Step 2: Choose Install the Consult III software automatically
3.Step 3 Choose JCI-iB-Alliance vehicle interface, just click next
4.Step 4: just click finish, completing Consult III hardware drive installation

How to Crack Nissan Consult III software, and configure Consult III software
1.Step 1: Open Consult III software on desktop
2.Step 2: perhaps show these error: there are no registered VI/MI, please contact your administrator, just ignore, click “OK”
3.Step 3: click “SUB” button
4.Step 4: click Administrator setting
5.Step 5: input Consult III Password — nissanconsult3
6.Step 6: Choose VIMI registration
7.Step 7: Input Consult III VI serial number: 926573, and click: set
8.Step 8: Click the home button
9.Step 9: then click: “Connect” button
10.Step 10: the Consult III will found hardware, show: checking the firmware version
11.Step 11: choose the Function of Consult III software, just enjoy it

Be the first to comment

Leave a Reply

Your email address will not be published.


*