Good news!!! Successfully completed Mercedes W211 All Key Lost within 3 minutes using Xtool X100 Pad3 and Xtool M821 Adapter.
Device required:
Xtool X100 PAD3/Pad Elite/H6 Pro/A80 Pro etc
Xtoool KC501 eeprom adapter
Xtool M821 Benz AKL adapter
Mercedes BE key
M821 adapter cannot be used with x100 pad/pad2.
1. Set up connection
x100 pad3 will show you wiring diagram
The brief connection should be like this:
2. Main steps
Read EIS information
Read EIS password
Generate key file
Write key
Go to Immo-Mercededs-Infrared Key System- Key Programming- All keys lost-W211-Operation on bench (Fast)
When operating on bench, a 120-ohm resistor needs to be connected between CAN-H and CAN-L of some EIS.
Read EIS information
Press OK
Insert the IR key adapter into the EIS
Calculate password success
Press OK and select key position to be generated and key format
Press OK to continue
Then insert a new key into KC501 infrared key slot
Write key successfully.
Go to IR key Function-Read key information
Read new key information and test the new BE key.
Get Xtool X100 PAD3 informatiom: sale@cnautotool.com
Leave a Reply