ISUZU MU-X Remote Program with VVDI KeyTool + Obdstar X300DP

ISUZU MU-X remote done! Today, we managed to make a new remote to VVDI Key Tool and OBDSTAR X300DP PLUS.

Car: ISUZU MU-X

Key tool: Vvdi Key Tool and Obdstar Key Master X300 DP

Vvdi keytool is used for remote generation

Obdstar X300DP is used for remote programming

Remote

Steps:
Step 1: VVDI Keytool generates a remote
Step 2: Obdstar key master programs a remote
Step 3: Test the new remote

In detail…

Step 1: Xhorse VVDI Key tool generates a remote
Vvdi keytool starts to generate a remote:
Remote program – Asia – Isuzu – Thailand



2BTN 1234 ISUZU Thailand ASK 433 MHz


Connect the remote module to the VVDI key tool

Press “Gen” to generate a remote
Remote is generated!

Success!
Put the battery cr2032 and install it into the remote shell

Step 2: Obdstar X300 DP programs a remote
Turn ignition on
Obdstar tool starts to work for the ISUZU remote
Isuzu – Isuzu v30.16 – remote – MU-X




Program remote

Turn ignition on

Program at most 5 keys

Close all doors and open the driver’s door

Number of programmed remotes: 2

Press adding remote unlock button for 5 times until double signal light flashes

Isuzu remote programming success!

Number of programmed remotes: 3
Step 3: Test the new remote

It’s confirmed working!