How to update Lonsdor K518ISE kernel

Why do you need update Key Programmer Lonsdor K518ISE for the hibernation function?

Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in summer when it’s hot

How to update Lonsdor K518ISE hibernation function?

Here you go…

Device: Lonsdor K518ISE Key Programmer

Condition: for all K518 devices with working normally

New released: Added Hibernation function; Kernel update supported

Version: K518 APK V1.5.25

Preparation for Update:

1.  Power on the Lonsdor machineor keep the battery level over 80%.
2.  Make sure wifi network works goodand the Lonsdor machine can receive signal well;

Update steps:

1.  Click [One key update] and skip to below interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.

2.  After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].

3.  Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.

4.  Click [Install]after updating the kernel file. And the device will reboot to install kernel.

5.  Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.

6.  The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.

7.  Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .

8.  The benefits for update: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in summerwhen it’s hot.

Done!