(Guide) SuperOBD SKP-900 SKP900 program Honda Accord 2015 new key

July 1, 2017 Eva Auto key Programmer 0

This is an operation guide to program Honda Accord 2015 new key by using SuperOBD SKP-900 SKP900 Key Programmer. Hope it helps!

First choose “Immobilizer” on main menu, select “Honda” then “System Type” then “Immobilizer 3”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-1.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-2.jpg
Next you will see Vehicle Selection, press Enter button to go on. It will remind you to turn ignition on. Turn on ignition and wait about 1 minute for system adapting.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-3.jpg

After that choose “Add 1 pc key”

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-4.jpg

Turn on ignition SKP-900 show “Programming” then turn off ignition. Unplug the original key and insert the new key in 15 seconds.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-5.jpg

Then use the new key to turn ignition on then off. Turn ignition on then off again. Now turn ignition on and wait. The immobilizer indicator will be off, press the Enter button to confirm.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-6.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-7.jpg

Turn off the key and turn it on back. It will show “Adapt Key Success”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-8.jpg

Now car start OK and remote work with this new key programmed by SKP-900 key programmer!

Related posts:

  1. Program Honda Vezel 2015 All Keys Lost by OBDSTAR X300 DP PLUS
  2. Which better Lonsdor K518ISE, SKP1000 or Superobd skp900?
  3. SKP1000 Key Programmer Compare with SKP900 Key Programmer
  4. SKP1000 Key Programmer Compare with SKP900 Key Programmer

Be the first to comment

Leave a Reply

Your email address will not be published.


*