It supports Basic Functions including Read Warning Message, ECU Information, Live Data, Read Codes and Erase Codes, as well as 41 Hot Special Functions including BMS Reset Alert, BMS Clear Contactor Stress Index, EPB Service Mode, Brake Bleed and Read/Write TPMS Sensor ID for Model X and Model S.
It can be use the tesla cables work with autel machine , the autel tesla cables have Cable LAN001, cable CAN001 and cable CAN002 .
LAN001
Connects to Tesla port X861 (located behind the instrument cluster) to activate factory mode (instrument cluster must be disassembled)
Connects to Tesla port X863 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
Connects to Tesla port X863 (located to the left of the instrument cluster) for diagnostics pre-2015/Sept vehicles.
CAN001
Connects to Tesla port X437 (located below the central control screen) for diagnostics of post-2015/Sept vehicles.
CAN002
Connects to Tesla port X437 (located below the central control screen) for diagnostics of pre-2015/Sept vehicles.
In the package, there is a sheet of paper writing when and where the cable should be used, where and how to connect the cable to the Tesla and Autel MaxiSYS Ultra / MS919 / MS909 and so on .
More details for autel ultra , welcome to check our website directly
www.cnautotool.com
Leave a Reply