Volvo PTT Calibrate Electrical Unit Pump for Volvo MACK I II III

How to use Volvo PTT to calibrate electrical unit pump for Volvo MACK I II III?

Preparations:
Volvo Diagnostic Kit (88890300)

Procedures:

Connect Volvo PTT interface to vehicle,and run Volvo PTT software.

Click “Manual Selection”

Login and identify connected vehicle

Select “Mack Trucks”–>”V-MAC I/II/III,ITC”–>”Model”–>”MACK”

Click “OK” to continue

Enter a work order number and click “Start Work”

Select “Calibrate” tag

Under “Engine,Engine mounting and equipment”

Select“2361-07-03-01-Unit Pump,Calibration”

Click “Start”

Please read the information at left filed:

“The Calibration code in the ECU can be verified by the user by entering an EUP then select the Test radio button and click on the Run button.The ECU will be queried for the Calibration codes i memory and those that match the entries made by the user will be identified by a green symbol A red symbol indicates the Calibration Code in memory does not match the Calibration Code entry made by the user.…”

Select radio button to test or calibrate the electrical unit pump

Click “Play/Run” button to start the operations

Done!
www.cnautotool.com