VVDI MB Tool All Keys Lost Programming for Benz W204 w207

In this instruction,CnAutotool want to show you how to use VVDI MB tool to program new keys for Mercedes Benz W204 W207 all key lost.

Run VVDI MB Software,and select “EIS Tool”

Chassis “Auto Detect (CAN)”

Click “Read EIS data”

Select “Save EIS data” to save the EIS data on your PC

Select “Password Calculation”

Select this if lost all working key

Then select “W172,W204,W207”

Select “Data Acquisition”

Then it will prompt you with below massage

Warning:

1.This operation need about 2.5 hours.

2.Connect EIS with correct cable before contiue

3.Don’t connect ESL to cable

Click “Yes” to continue

Connect EIS with correct cable on the bench,don’t connect ESL

Connect “device OBD line” to cable OBD head.

Attention:Not car OBD

Press OK after confirm

Connect “IR adapter” to VVDI MB Tool

Please connect VVDI MB BGA Tool,EIS and emulator key as blow show

Press OK,now it will cost you about 2.5 hours

After then completing,please save the data on your PC

Acquistion finished,upload the saved data with “Upload Data” for password,click “OK” to continue

Select the data you save just now

Upload success.Queue number:1,require about 1 minutes to finish

Wait about 1 minute,the press “Query result”

Copy “Key Password”

Back to “EIS Tool” and click “Read EIS data”

Paste the key password

Save EIS data

Press “OK” to save HC05 formal file

Select “Prepare Key File” and click Load EIS file

Select the data file you save just to upload

Select “Key 4” and “v051”,then click “Prepare Key file”

Now save the key file

Then click “Load Key file” to load key file you save

Click “Write” button to start writing key

Now click “Identification key” again to check

The key data file have been wrote into key,then back to “EIS Tool”

Click “Read EIS data”

Now use the new key to turn ignition on and off several time

Read EIS data again

Key 4 is activated done!

Done!