To use new MB Star SD Connect C4 DoIP diagnostic scanner, you need to configure it first. Follow steps below to configure SD Connect C4 DoIP multiplexer:
1. Go to local network connection
2. Press Properties
3. Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue
4. Enter IP address
IP address: 172.29.127.24
Subnet mask: 255.255.0.0
5. Click on Advanced
6. Click on Add to configure DoIP IP address
7. Set DoIP IP address to 169.254.0.** (i.e 169.254.0.45)
8. Click on OK to finish configuration.
FYI:
The new SD connect C4 DoIP (1:1 clone of the original) is able to work for DoIP.
It’s the only C4 that supports ethernet communication (DoIP).
Have tested no issues on new mercedes with doip.
Leave a Reply