VOCOM II WiFi Setup & Firmware Update Instruction

VOCOM II is a wireless device that supports to the diagnosis of Volvo heavy-duty truck via WiFi. Small and portable, with no need for wires. This is an initial guide on WiFi settings & firmware upgrades.

How to setup Volvo VOCOM 2 WiFi?
1. Power on the Mini Vocom2 dongle and the lights will be flashing. Find the WIFI signal Vocom2D_******* from laptop. Click “Connect”.
VOCOM II WiFi Setup & Firmware Update Instruction-1 (2)

2. Input “v2d+ SN num”, SN number is 7 digits which you can find it from the backside of the VOCOM2 dongle. Then click “OK” and done.
VOCOM II WiFi Setup & Firmware Update Instruction-2 (2)

How to update Volvo VOCOM 2 firmware?
Note: Make sure the Mini Vocom2 is powered up by 24V ECU or truck. Low voltage will affect the upgrade process.
Follow the path:
All Programs >> VOCOM II >> VOCOMII Configurator >> Setting >> Advanced >> Update device firmware >> Update button
VOCOM II WiFi Setup & Firmware Update Instruction-3 (2)

VOCOM II WiFi Setup & Firmware Update Instruction-4 (2)

VOCOM II WiFi Setup & Firmware Update Instruction-5 (2)

VOCOM II WiFi Setup & Firmware Update Instruction-6 (2)

It’ll run the TECH TOOL automatically when the firmware update is finished…
VOCOM II WiFi Setup & Firmware Update Instruction-7 (2)

VOCOM II WiFi Setup & Firmware Update Instruction-8 (2)

Log in then it’s done.
VOCOM II WiFi Setup & Firmware Update Instruction-9 (2)

VOCOM II WiFi Setup & Firmware Update Instruction-10 (2)
www.cnautotool.com

Add a Comment

Your email address will not be published. Required fields are marked *