Autel IM608 Pro BMW EWS3 response timeout Solution

Question: I failed to read BMW 2004 model EWS3 immo data with Autel IM608 Pro. Follow the instruction but gives a response timeout error.




Solution:
Do following
1. Enter the BMW EWS3 path of the programmer to try to read and write;
2. Check whether the adapter board pins correspond to the EWS3 slots accurately;
3. Operate in strict accordance with the operating instructions.
4.
Step 1: Connect the matching board and EWS3 module first.
Step 2: Connect the board and XP400 PRO.
Step 3: USB connect XP400 PRO and tablet.
Step 4: Connect the 12V power supply to the XP400 PRO; note that the power of the IM608 must be more than 30%.
Step 5: Open the menu and execute the read function.
Step 6: The 12V is not connected, and the function is executed directly, the USB port will hang up and cannot be used. In this case, please restart the tablet, the USB port is enabled, and communication can be performed normally.

If not working, send data log to Autel technician.

Add a Comment

Your email address will not be published. Required fields are marked *