BMW FEM BDC Test Platform  is a powerful tool for key programming, ecu and gearbox coding. It’s necessary for automotive locksmith, car electronics technician, auto repair shop.

Function:

with your FEM/BDC keys, FEM BDC Module Testing Platform is easy to detect FEM BDC Control Module in good condition. No need start-stop button.

Designed with 4 interfaces. It is used for making FEM and BDC keys, suitable for connecting the dashboard, keys, FEM, ECU and Gearbox.

Fits model:

BMW F20 F30 F35 X5 X6 I3 etc

Feature:

No need to test them on the car, very convenient and efficient.

Compatible device:

Can works alone or works with BMW FEM key programmers, i.e Yanhua BMW-FEM,BMW Explorer, VVDI2 BMW,  CGDI Prog and BMW F-series FEM Blade key etc

How to use BMW FEM BDC Test Platform?

Pic. 1: the adapters are insert into the test platform.

Pic. 2: Connect well the harness and the ignition switch is in the OFF status,make sure the voltage is 12V.

Pic.3: Put the FEM/BDC key into the sensing area, press the “Enter” button and the red LED  flashes.

Press the “Enter” button, the screen displays FEM BDC TESTS:11.2V, the battery icon on the screen turns up, means it starts OK.
Again press the “ENTER” button and ACC OK
Again press the “ENTER” OFF OK
Then FEM BDC test OK, if no connect to FEM BDC.

If the key is not pass test, the test platform displays: NO FIND FEM BDC HOST.