Share Experience for Porsche PIWIS Tester 2 V15.1VCI Configuration Error

Sometimes when your Diagnostic Tool for Porsche connect USB and Power indicators turned on, the Porsche PIWIS VCI displayed an error message: “VCI configuration error. There is no VCI was recognized.”

30-1 30-2
30-2

We have few customer feedback that the Porsche PIWIS Tester 2 V15.1 VCI may meet configuration error when the piwis tester ii have well communicated has been built with laptop.

CnAutotool.com technician check the problem and share experience for Porsche PIWIS Tester 2 V15.1VCI configuration error.

Possible reason:
Incorrect operation.Auto Scanner Tool Porsche tester II users do not need to enter into VCI self-test procedure.

Solution:
Please follow the correct operation procedure provided below:
1) Turn ignition to ON and start the engine
2)Connect Porsche Tester II system to the car, wait until the indicator light flashes then connect the device with computer using USB cable.
3)Select your Porsche model and year

30-3

4)Enter PIWIS diagnostics interface.

5) If the system displays “Control unit selection: Loading control unit selection”, the PIWIS software is working.

30-4

NOTE: you won’t see control unit list if piwis tester is not connected properly or the device is damaged.

6) If the system cannot detect vehicle ECU modules, there is no good communication among the vehicle,device and computer or the PIWIS tester 2 tool is damaged.

30-5

PIWIS Tester 2

The Porsche Diagnostic Tool piwis tester ii work with the old and latest porsche car. It is equiped with the panasonic laptop and original software for the test.

Functions:

Read/clear error code, catch data stream, computer programming match, component test,maintenance information consult, components site drawing, wiring diagram.

The piwis tester ii work with the old and latest porsche car. It is equiped with the panasonic laptop and original software for the test. Porsche piwis tester II can help you diagnose and programme the most new and old kind of porsche cars. For example: 911(997), Boxster/ Cayman,(987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera from CnAutotool.

The new Panamera can only be diagnosed by using this Porsche PIWIS Tester-II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new PIWIS Tester-II by the end of 2010. PIWIS Tester-I must be used for older models in the Porsche workshop until end of 2010.

Support for PIWIS Tester-I will no longer be available once the earlier diagnostic programs have been transferred to PIWIS Tester-II.

When the PIWIS Tester-II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Porsche Piwis Tester II Support Systems:

25-1

ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Porsche Piwis Tester II Vehicle Coverage:

1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera

Porsche Piwis Tester II Packing List:

1. Piwis Tester II VCI * 1 PCs
2. OBDII Cable *2 PCs
3. USB Cable * 2 PCs
4. Extensional Cable *2 PCs
5. Used PANASONIC CF30

Porsche Piwis Tester II after Sales Service:

1. One year free maintenance
2. One year free updating
3. Long-term technical support

Update: by CD or HDD, one year for free, can not update online. 200usd for one time after one year.

Q: How to accomplish Porsche Piwis Tester II online function?
A: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q: How to handle with 90 days locking about Porsche Piwis Tester II?
A: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q: How much software update charges for per year?
A: The first year software update fee is free.

Q: How to update ?
A: By CD or HDD .

Q: What is the current software version for Porsche Piwis Tester II?
A: Version 11.7 Covers Porsche’s vehicle lists to the whole year of 2013’s.

Q: If License area showing China or CN?
A: The License Area does not show China or CN.

Q: If there is manual available?
A: Yes. Provide electronic English manual for free. Please e-mail us to obtain it.

Q: If it is showing Porsche Logo when booting computer?
A: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q: What languages are available for   automotive scan tool  Porsche Piwis Tester II?
A: Language availability: German, British English, American English, French, Italian, Spanish,Japanese, Chinese, Russian, Portuguese, and Dutch.

Q: License Validity?
A: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Requires ONLINE modules: (F BCM R BCM DME ELV SRS KEY)

Languages:

English
Francais
Italiano
Espanol
日本语
中文
Pyccknn

NOTICE:

Software will never expire!!

25-2

WIFI Piwis 2 Porsche Piwis II Hardware With Wireless Function Released

22-1

WIFI Porsche Piwis 2 Wireless Piwis 2 Porsche Diagnostic Tool Without Software
Wifi Piwis II with wireless function for Porsche Diagnostics, Wifi Piwis Tester 2 can connect to Piwis 2 laptop. Wifi Piwis 2 Porsche Diagnostic Tool with V18.100 Piwis II software support Porsche Online programming. Wifi Piwis 2 is Samtec hardware stable for Porsche Diagnostic and Programming.
WIFI Piwis 2 Wireless Porsche Piwis II Hardware with Piwis 2 laptop installed Piwis 2 software Ready to Use

14537156740 WIFI Porsche Piwis 2 Hardware With Wireless Function Released
Wifi Piwis Tester II for Porsche Functions:

1.Wifi Piwis 2 support wireless connect with Porsche piwis tester 2 laptop.

2. Wifi Piwis 2 Read/clear error code, catch data stream, computer programming match, component test,maintenance information consult, components site drawing, wiring diagram.

3.The WiFi piwis tester ii work with the old and latest porsche car. It is equiped with the panasonic laptop and original software for the test. Porsche piwistester II can help you diagnose and programme the most new and old kind of porsche cars. For example: 911(997), Boxster/ Cayman,(987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.

4.The new Panamera can only be diagnosed by using this Porsche PIWIS Tester-II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new PIWIS Tester-II by the end of 2010.  PIWIS Tester-I must be used for older models in the Porsche workshop until end of 2010.

5.Support for PIWIS Tester-I will no longer be available once the earlier diagnostic programs have been transferred to PIWIS Tester-II.

6.When the PIWIS Tester-II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.
Why choose Wifi Piwis 2 Porsche Diagnostic Tool Porsche Piwis II from CnAutotool.com:

1. Wifi Piwis 2 Porsche diagnostic tool support wireless connect with Porsche

2. Wifi Piwis 2 from CnAutotool.com support wifi connection without router

3. Wifi Piwis 2 for Porsche with newest Piwis II software support Porsche Car till 2016.(kindly note, this is only piwis 2 hardware not included Piwis 2 software)

4. Wifi Piwis 2 is more convenient for workshop for Porsche diagnosis. (Porsche online programming had better use USB cable connection, it’s more stable and safe)

Any need of Wifi Piwis II hardware wireless Porsche Piwis II without software, feel free to contact us freely.

What is funtion of Porsche Piwis II Engineering Mode ?

Piwis II Porsche diagnostic tool, Porsche Piwis 2 with regular version and Piwis 2 engineering mode, what’s the Piwis tester ii developer mode spcial? what can the Porsche piwis II engineering mode do? Here CnAutotool.com share PIWIS II developer mode function as following help to customer choose it.

The software version is:V18.100

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

1

 

What is funtion of Porsche Piwis Tester II Engineering mode ?

 

  1. Start/stop”LAST MODE”wait for stopping the engine and change memory
  2. Spoiler”lessen time when the car starts
  3. Spoiler”fixed”
  4. Spoiler”change angle”
  5. Change VO code
  6. Close Air Mercury
  7. Upgrade power
  8. Remove the tire pressure sensor
  9. Install reversing camera
  10. Install USB/BT
  11. Close the seat belt warning
  12. Change CDR/PCM operation interface
  13. Air condition memorization
  14. Start CDR_AUX
  15. Open the PCM function
  16. Manually set codes
  17. Automatically set codes
  18. Manually do programming
  19. Automatically do programming

 

PIWIS II Developer Mode software display:

2 3 4

 

 

 

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year for Porsche car models

Top 8 Reasons to Get Porsche Piwis Tester II

Piwis Tester II is the latest professional tester for Porshe,Lastest version software is V18.1,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access.

The piwis tester ii work with the old and latest porsche car. It is equiped with the panasonic laptop and original software for the test. Porsche piwis tester II can help you diagnose and programme the most new and old kind of porsche cars. For example: 911(997), Boxster/ Cayman,(987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera from CnAutotool.

Piwis Tester II with EVG7 Tablet allows you to experience the global and individual diagnostics of all old and newest Porsche vehicles with a low-end diagnostics at CnAutotool.com.

Top 8 Reasons to Get Porsche Piwis Tester II
1. Software Version: V18.1
2. Laptop: CF-30 (Second Hand) or brand new Lenovo E49AL—Software is inside the Hard Drive. No need Installation
3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (One Year for Free, It can not be updated online, you need to return hard disk to us for upgrade, 200USD for one time update after one year.) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Porsche Piwis Tester II Update Software V14.000 Free Download (American Server)
7. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them.
8. Support Key Programming function,cost 220USD per time ( you need consult our customer sevice first with the type and year of your car)