Mitsubishi MUT-III Software Download, Install, Review, User Guide

MUT-III software download for PC:

Here are links for Mitsubishi MUT-3 PRE15061-00 Multilanguage

NITROFLARE.COM – INTERCHANGEABLE LINKS (750 MB)

FILEUPLOAD.PW – INTERCHANGEABLE LINKS (750 MB)

UPLOADED.NET – INTERCHANGEABLE LINKS (750 MB)  (I used this one 5hrs download time)

MYFILES.ONL – INTERCHANGEABLE LINKS (750 MB)

TURBOBIT.NET – INTERCHANGEABLE LINKS (750 MB)

Description:

MUT-III (Multi Use Tool) is a hardware-software complex for diagnosing Mitsubishi cars.

Contains:

VCI (Vehicle Communication Interface) – a hardware interface with which a diagnostic laptop is connected to a car, as well as some other diagnostic procedures;
set of diagnostic cables for connecting to vehicle diagnostic points (OBD-II connector, battery terminals, etc.);
Microsoft Windows laptop with proprietary software.

The MUT-III complex allows for the complete diagnostics of ALL electronic components of a Mitsubishi car, measurement of engine and transmission parameters, tuning and adaptation of electronic components of the car, updating the firmware (firmware) of the car blocks, etc.

You need to know that to change the settings of the “hidden functions” of the car (Lancer X, ASX, Outlander XL, Outlander III, Eclipse Cross, L200 V, Pajero Sport III …) in its pure form MUT-III is not suitable.
With its help, you can only unload from the car and load back the configuration files (kon-file). You can edit these settings with third-party software .
mitsubishi-MUT-III-software-download-1

mitsubishi-MUT-III-software-download-3

MUT 3 VCI (Vehicle Communication Interface):

mitsubishi-MUT-III-software-download-4

mitsubishi-MUT-III-software-download-6

source

Mitsubishi MUT 3 install:

So mine just showed up, but the software craps out mid-install. It left a MUT-III link on m desktop, but then it bitches about not having IE5. I’m running Windows 7, and I set the installer to run in XP compatibility mode. :-/

Tried an XP machine, got this error:
FAILED TO SETUP MSDE COMPONENTS ON MUT 3 CAESARCOMPDB2

I have installed no problem on W7 and XP
for W7 – run as admin, and also run internet explorer in full time compatibility mode.
for XP – it just worked.

4 . you can run MUT3 SW on windows7
it runs on Internet Explorer (yes, i know!)
before you run MUT3 – quit any IE windows you have open
– put your IE into Compatibility Mode.
5. In W7 it will error when you load up MUT3. it does for me anyways. just kill the error popup and off you go
6. when you first connect the VCI – wait a while – it will need to update the VCI firmware in some cases. just let the MUT3 S/W do it’s thing. look on the VCI screen for details of what it’s doing before you go any further
Conclusion:
Mut3 needs some patience… it was made at the time of web 0.1 or just before.…
It runs only on XP and only with a really old release of IE.
It is difficult (not user friendly) to choose the car’s model.
It is very difficult to navigate from menu to item…
Good luck….

MUT 3 VCI user guide:

MUT 3 installation help

How to install Mitsubishi MUT 3 Software on Windows 7 ?

MUT3 PC requirements:

Operating System: Windows 7 Professional 32/64-Bit
Memory: 4GB (1x4GB) 1600MHz DDR3L Memory
Hard Drive: 500GB (5400rpm) Serial ATA Hard Drive
Processor: Intel Core Intel Core i3-4010U Processor (1.7GHz, 3M cache)

 

Some of the Mitsubishi MUT3 functions are passworded and those passwords are usually matched to the MDB password fields included in the updates. Which vary by distribution, version and locale. Get a MS Access password cracker and run it on the MDB files in your distribution to learn the passwords.

The Teach-In Function requires a certain version, or later, of the TCU firmware to be installed in the desired TCU. The MUT3 can do this and the newer firmware files are included in the MUT3 software distribution for 2010 and later but must be manually copied over to the computer. Until that TCU version is in the TCU, the MUT 3 will not display the Teach-In option.

Mut 3 Mut III MUT-3 Mitsubishi Diagnostic Scanner FAQS

Details for installation :
The MUT-3 software with the Chinese usually comes as two directories on one DVD. The first one is the program installation which must be installed first. It is named something like with PRExxxxx, with “xxxxx” indicating the program version. The installer program, Mut3Check.exe, can be run from the sub-directory on the distribution DVD.

Please note that if you have a local security password policy on the computer, the PRG install may fail as the SQL installation does not use a complex password.

After the Mut3Check.exe program is installed and the computer has rebooted, you can install the database updates. Typically in e sub-directory CD3Exxxxx, where “xxxxx” is the version of the update. Only ONE version of Mut2Check.exe can be installed without removing any existing version while MANY updates can be added.

As usual experience, the Db update MUST be executed from a root directory of a CD or DVD, NOT from a sub-directory. Got all kinds of “Failed to install” & “failed to update” errors when running the update from the VD sub-dir.

Burn a new CD with the CD3Exxxx files in the root, so ECUUpdateJudg.exe is in the root of the CD. Then run ECUUpdateJudg.exe from the CD.

www.cnautotool.com

sale@cnautotool.com