How to solve Xentry [2221-45] No access authorization

Optional solutions of Xentry [2221-45] No access authorization
Here are some optional useful solutions of how to fix 2019 Mb SD Connect C4 open shell error [2221-45] “No access authorization for XENTRY Diagnostics …” some solutions are from CnAutotool engineers, some from users sharing at forums.

Problem description:

(2221-45) No access authorization for XENTRY Diagnostic was found on the server. You must contact the User Help Disk.

How-to-solve-Xentry-[2221-45]-No-access-authorization-1

Solution Way For WIN7 system HDD:

Browse to C:\MB\Xentry\fusoko\eclipse\plugins folder,

delete com.daimler_xentry.diagservice_1.6_0.2016.07181047 file.

How-to-solve-Xentry-[2221-45]-No-access-authorization-2

If you Running 2019.09 SD C4 WIN8 system HDD

Just need to delete the following:

How-to-solve-Xentry-[2221-45]-No-access-authorization-3
Problem solved !

Hope it can help you if you happened the same problem.
Solution III from another user
Software version: 05.2016 Xentry
Free download Xentry-2221-45-fix.rar:

https://mega.nz/#!Ip1GkQhR!hHakXl1U1Q5SEE_5NlIZcfSNRE_2CKDJSL9OLXTexYw

(2 fix)
Solution IV with lots of thanks & likes in a forum
Software version: Xentry 2016.5
replace the file call com.daimler.xentry.diagservice_1.6.0.201605121225.jar in the folder
c:\program Files(x86)\Mercedes-Benz\Xentry\fusoko\eclipse\plugins
with the attachment below
2016.05-Xentry-[2221-45]-Fix.rar:

https://mega.nz/#!11kxTZZA!uBWlUVOx7XzWai-T7eSPJt6V_lVhG2Pl5PI02oUNXUM

Wish this helps

MB SD Connect C4 WIFI set on WIN10 laptop Xentry 09.2019 OK

Here share with you a personal tested guide, hope it helps and try your own risk!
How to set up Mb SD C4 Wireless on a Dell XPS15 9550 laptop WIN10 and run Mercedes Xentry 09.2019 software?

MB-SD-Connect-C4-WIFI-set-on-WIN10-laptop-1

I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.

After days of investigation and testing, the most important thing is that: The drivers for your wireless card MUST support AdHoc functionality.

This can be verified at the DOS command prompt. The command is: Netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.
Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.

The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.

Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.

AdHoc can now be verified at the DOS command prompt. The command is:
Netsh Wlan show drivers.
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly

With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity.
This is what worked for me. Depending on your computer skills, your results may vary.

P.S. Recommend to get  MB DAS Xentry HDD 09.2019 for WIN7 or WIN10, WIFI set on WIN10 100% OK!

MB-SD-Connect-C4-WIFI-set-on-WIN10-laptop-2

MB SD C4 Tourismo bus communication error (fixed)

I bought the MB SD C4+Dell D630 Laptop pre-installed bundle, when I test it have the problem SD Connect C4 cannot power on when connected with  Tourismo bus, I contacted there customer service at obdii365.com, and here is the solution provided by their engineer.

I will explain my problem in detail:

” I have tried 2 different mb sd connect c4 on Tourismo buses and sd connect does not power on.In the meantime those MB SD Connect C4 works normally to any other MB Truck and car.also on Tourismo have check MB Star C3 and works normally.”

You should check:
bus with OBD
pin 4 + 5
both must be connected and ground

In SDConnect “-” is 5 pin only. There is 4 contact not used in 16pin OBD connector.

“i’m getting an communication error when connecting xentry to a tourismo.”

Tourismo-bus-communication-error-1

A Communication error has occurred when access FPS system

Tourismo-bus-communication-error-2

Solution:

– turn OFF/ON BUS ground switch (our remove battery – cable). FPS1 wake up and MB Star diagnostic recognized FPS1/VIN code.

or
– enter the DAS ATEGO truck come and place manually and then it will work perfect

” Another problem is : “Currently the speed limit is set to 100 km/h. I’m trying to set it to higher value (with MB SD C4 DAS using modified EOL files). On the menu it tells me that I can, because there are higher values (105 km/h. 112 km/h, etc). But when I try to set the speed limit to higher than 100 km/h it doesn’t allow me to do it (can’t save the changes). When I try to set it below 100 km/h everything goes fine.”

I done the Access special settings , and it working perfect now!

MB Star SD C4/C5 Diagnostic Tool for Mercedes Benz Software Upgraded to 2019.09

Some customers consult about the latest software version for MB Star , the latest software update to 2019.09 now , please check the software details as bellow :

1. DAS 2019.09: the automatically Diagnosis Assistance System

2. Xentry 2019.09: New software released by Benz Company after 04/2009 by diagnosis new cars.

3. WIS net 2019.03 : Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

4. EPC.net 2018.11:Electronic Parts Catalog

5. ST Finder:Part Location Finder options: 2008 and 2016

6. STARUTILITIES :the movement management system and self-test

7. SD MEDIA 2014

8. PL73

9.Engineer Software : DTS monaco V8.14.016 And Vediamo V5.01.01 Support Offline Programming

10.HHT Software for old cars

11. Engineer version Vediamo updated to V5.01.01,Engineer version DTS updated to V8.14.016,Upgrade to the latest version of 2019 data

1) Fix the error that Mercedes-Benz DAS cannot directly call WIS

2) Join the DAS sedan smart offline programming

3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo

4) Join DAS special function password-free access PKW and SMART

5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline

6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit

7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function

8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly

9)Add DAS 212,207 prototyp model

More request , welcome to contact us directly

www.cnautotool.com

sale@cnautotool.com

How to solve Xentry [2221-45] No access authorization

Optional solutions of Xentry [2221-45] No access authorization
Here are some optional useful solutions of how to fix 2016 SD connect c4 open shell error [2221-45] “No access authorization for XENTRY Diagnostics …” some solutions are from eobdtool engineers, some from users sharing at forums.

Problem description:
(2221-45) No access authorization for XENTRY Diagnostic was found on the server. You must contact the User Help Disk.

How-to-solve-Xentry-[2221-45]-No-access-authorization-1

Solution Way For WIN7 system HDD:

Browse to C:\MB\Xentry\fusoko\eclipse\plugins folder,

delete com.daimler_xentry.diagservice_1.6_0.2016.07181047 file.

How-to-solve-Xentry-[2221-45]-No-access-authorization-2

If you Running 2019.07 SD C4 WIN8 system HDD

Just need to delete the following:

How-to-solve-Xentry-[2221-45]-No-access-authorization-3

Problem solved !

Hope it can help you if you happened the same problem.
Solution III from another user
Software version: 05.2016 Xentry
Free download Xentry-2221-45-fix.rar:

https://mega.nz/#!Ip1GkQhR!hHakXl1U1Q5SEE_5NlIZcfSNRE_2CKDJSL9OLXTexYw

(2 fix)
Solution IV with lots of thanks & likes in a forum
Software version: Xentry 2019.9
replace the file call com.daimler.xentry.diagservice_1.6.0.201605121225.jar in the folder
c:\program Files(x86)\Mercedes-Benz\Xentry\fusoko\eclipse\plugins
with the attachment below
2016.05-Xentry-[2221-45]-Fix.rar:

https://mega.nz/#!11kxTZZA!uBWlUVOx7XzWai-T7eSPJt6V_lVhG2Pl5PI02oUNXUM

Wish this helps

MB SD Connect C4 WIFI set on WIN10 laptop Xentry 09.2019 OK

Here share with you a personal tested guide, hope it helps and try your own risk!
How to set up Mb Star C4 Wireless on a Dell XPS15 9550 laptop WIN10 and run Mercedes Xentry 09.2019 software?

MB-SD-Connect-C4-WIFI-set-on-WIN10-laptop-1

I’m running Win10 on a Dell XPS15 9550 laptop with Intel AC 8260 internal wireless card installed.

After days of investigation and testing, the most important thing is that: The drivers for your wireless card MUST support AdHoc functionality.

This can be verified at the DOS command prompt. The command is: Netsh wlan show drivers
This command will show “Yes” or “No” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly.
Although I’m running Win10, Intel has drivers for the 8260 wireless card for Win8 which will enable proper AdHoc functionally.

The trick is to download the driver first, prior to removing your existing wireless driver. Download the driver ONLY, not any driver file with additional driver management apps included in the downloaded file.

Now you can go into Device Manager and remove your existing wireless card AND check the box that removes all software associated with it. My Win8 driver download file was a .exe file. I double clicked on it and the Win8 driver for my Intel 8260 card was installed. Went to Device Manager, right clicked on my 8260 wireless card and selected Properties. Clicked on Advanced and was able to see several AdHoc related entries. These AdHoc entries were not visible using the Win10 drivers.

AdHoc can now be verified at the DOS command prompt. The command is:
Netsh Wlan show drivers.
This command will show “Yes” on the line for “Hosted Network Support”.
If this line says “No”, AdHoc will not work properly

With AdHoc functionality confirmed, additional DOS commands can now be used to enable Road24h wireless connectivity.
This is what worked for me. Depending on your computer skills, your results may vary.

P.S. Recommend to get  MB DAS Xentry HDD 09.2019 for WIN7 or WIN10, WIFI set on WIN10 100% OK!

MB-SD-Connect-C4-WIFI-set-on-WIN10-laptop-2

How to enable DoIP communication for SD Connect C4 clone

Test report: MB Star diagnosis SD connect c4 version 2019 cloned multiplexer now can support ethernet communication (DoIP).

Here you go….

Go to Xentry Diagnosis

sdconnect-c4-doip-test-report-1

sdconnect-c4-doip-test-report-2

Diagnosis steps:

Step 1: the boundary conditions are recorded

Step 2: the control units are being initialized

Step 3: check vin

Step 4: the coding of the control unit is read

Step 5: the emissions-relevant data are read out from the vehicle

sdconnect-c4-doip-test-report-3

Xentry diagnosis overview

sdconnect-c4-doip-test-report-4

The data are being determined

sdconnect-c4-doip-test-report-5

Select A26/17 Audio 20 (Head Unit)

sdconnect-c4-doip-test-report-6

sdconnect-c4-doip-test-report-7

sdconnect-c4-doip-test-report-8
Important notes:

– it is recommended to connect a charger. the battery voltage must be higher than 12.50v

– the data read out of the control units refer to specific events or system statuses and serve as a basis for narrowing down the source of the defect. the data maybe include a tolerance and it may therefore not necessarily be possible to link them to a certain event, location or time.

sdconnect-c4-doip-test-report-9

ESD

hazard due to electrostatic discharge

Safety instructions/precautions

– to avoid damage to control units, antennas, sensors etc. due to electrostatic discharge (ESD), the technician must comply with the appropriate safety precautions before replacing electronic components

– proper static discharge can be guaranteed very effectively by means of a grounding strap for the wrist connected ground

– alternatively, static electricity can be discharged by deliberately touching

– repair or cleaning work on electronic components may only be performed on an ESD worksurface using a grounding strap for the wrist to ground the body
sdconnect-c4-doip-test-report-10

establishing communication with control unit A26/17 Audio 20 (Head Unit)

sdconnect-c4-doip-test-report-11

sdconnect-c4-doip-test-report-12

reading coding data

sdconnect-c4-doip-test-report-13

actuation of function “ethernet communication (DoIP)”

sdconnect-c4-doip-test-report-14

sdconnect-c4-doip-test-report-15

sdconnect-c4-doip-test-report-16

sdconnect-c4-doip-test-report-17

sdconnect-c4-doip-test-report-18

sdconnect-c4-doip-test-report-19

MB SD connect C4 2019 ethernet communication (DoIP): checked!

MB SD C4 Firmware Update Manual

1. Prepare 6 common AA batteries of 5. Then install the battery by following the Manual of How to Install Battery for MB SD C4. (Notes: The batteries need to be new with fully charged.)
Pictureͼ1
2. Connect the Mb Star C4 interface with the computer by green cable. Then use the OBD cable to connect the MB SD C4 interface with car. If can not connect car, please use the OBD 12V power supply to take place of car.
3. Open the DAS software. Then check those 3 files Update_automatic, Update_manual, Update_Special from the C:\programm files\SDconnect Toolkit. If the name of the file is not right, please correct it.
Pictureͼ2
4. Restart the computer.
5. Start to update MB SD C4 firmware by following ” MB SD C4 Firmware Update Instruction”.
If there is any problem, please feel free to contact me by sale@dasobd2.de
More details, please check on

How To Activate 2017.12 MB SD Connect C4 C5 Xentry

User guide:how to activate 2019.05 XENTRY start key

Step-by-step ,here you are:

Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop.

Step2: Select ” SDconnect”
2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-1

Step3: Select ” Configure”.
2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-2

Step 4: Select the icon as picture.
2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-3

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-4

Step5:
2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-5

Step 6 and 7 :
2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-7

Step 8 , 9 and 10.

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-8

Step 11: Successful to Activation MB SD Connect C4 C5 MB Star Diagnostic Tools
2017.12 MB SD Connect C4 C5 Xentry Start Key Activation-9

If you are interesting in buy MB Star Diagnostic Tools , Please contact our sales via email  sale@cnautotool.com,better price waiting you.

All kinds of informations on MB STAR will be displayed here.

Why will you choose Xentry connect C5
23-1-1-1-1
Original Plan 1:1 Copy Mercedes Wifi Xentry Connect C5 multiplexer For Mercedes Car And Trucks.
After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.
Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1, somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.
Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.
So , we suggest you buy Mercedes Benz DoIP Xentry Connect C5 MB Star C5 Plus Panasonic CF52 Laptop from OBD2TOOL , We will install and activate for you ready to use. What’s more, this package offer saves you money than buying them alone.
After all, there are many reasons to choose Xentry C5 Connect. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you will not lag behind the progress. Each client of of yours, seeing with his own eyes ,that you are in your work using the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists