CGDI prog MB: How to get tokens+ exchange points to calculate password

Are you searching for the method to get CGDI Prog MB tokens and exchange points for password calculation service? Here will give you answer.

What is the token policy for CGDI Prog MB?

Subscription A: CGDI Prog MB can calculate the password twice for free each day for the first 180 days (from the day you activate device)
When license gets expired, It will cost usd60 for another 180 days tokens, please pay to Token Service 180 Days for CGDI Prog MB Key Programmer.
Subscription B: One free token each day all the time. And it won’t get expired anymore. If you want more tokens, you can get via following ways:
1. Earn points when you use the CGDI Pro MB device, one point equals one token, you can redeem token in software yourself.
2. If you have CGDI Prog BMW MSV80, we can bundle with your CGDI MB to have one more token per day, which means 2 free tokens each day
3. If you have CG100 PROG III Airbag Restore Devices, and CG Pro 9S12, please pass us serial number to bundle them together, you will have two more tokens, which means 4 free tokens per day.
4. If you don’t have other CGDI device but still want to calculate password more times, one token will cost 5usd. Please pay for One Token for CGDI Prog MB

calculate  - password  -  1

Notice: You can calculate 4 times at most each day.

How to collect and exchange CGDI prog MB key Points?

Step 1: Connect CGDI prog MB to PC well

Go to CGMB software and click “Key Points” at the top right

calculate  - password  -  2

Step 2: Power on the device and insert the Benz key into CGDI prog MB device

calculate  - password  -  3

Step 3: Click “Key check” in the online store page

Note: If the system prompts “Key points not collected”, please click “OK” to access next step.

Otherwise, these key points have been collected or the key is not original CGDI product.

calculate  - password  -  4

Step 4: Click “Collect points”, it will show “200 points” and prompts “Key points collected successfully”

Click “OK”

calculate  - password  -  5

Step 5: Select “Credits exchange” to convert the key points

It will prompt “Will the points be converted? Do you want to continue?”

Click “YES”

calculate  - password  -  6

Step 6: Every 200 key points can be redeemed for one password calculation service

CGMB software will show “Successful redemption” if the key points are exchanged successfully

calculate  - password  -  7

Hope it can help you out! Enjoy!

CG PRO Reset Odometer on a BMW X1 CAS3 2010 M35080

Model: BMW X1

Year: 2010

Instrument type: 35080

Immobilizer: CAS3-0L15Y

Device: CG PRO 9S12 programmer

Purpose: odometer correction



Original odometer: 191,245 km

Step 1: Remove Dash

Turn off ignition.  Remove and disassemble dashboard instrument




cgpro-bmw-x1-change-mileage-6 cgpro-bmw-x1-change-mileage-7

Locate chip m35080DOWQ

cgpro-bmw-x1-change-mileage-8 cgpro-bmw-x1-change-mileage-9
Step 2: Remove IMMO Box

Remove immo box CAS3-0L15Y







Step 3: Change mileage in dash

Open CGPro software

Solder 080DOWQ chip into CGPRO M35080/35160 adapter


Select Model->Adjust mileage->BMW->35080 V1 (080DQ)


Choose Adjust mileage function icon and enter mileage you desired

Step 4: Correct odometer in Immobilizer

Connect CAS3 0L15Y eeprom IC chip with CG-Pro DB25 connector


In CG Pro software, select Chip->Adjust mileage->BMW->CAS3 0L15Y

Manully enter new mileage you desired

Press YES to confirm

Both dash and immo mileage reset successfully. Reinstall dashboard and immo box to vehicle.


Reset fault codes or do necessary coding with CGDI BMW.

CGDI BMW Program CAS3 CAS4 All Key Lost No need DME ISN

Why CGDI Prog BMW is one of the must-to-have BMW Devices ?
No need DME ISN or Removing ISN when All Key Lost.

Note: The BMW Data modification and verification license is required. The license is free to use.


1.Test CAS3 All keys lost

2.Test CAS4 all keys lost


Read CAS3 eeprom dand CAS4 dflash data with CG PRO or VVDI PROG

1 .Test CAS3 All keys lost No need DEM ISN code


Select BMW Data Modify

Select Data type: CAS3

cgdi-bmw-cas-all-key-lost-2 cgdi-bmw-cas-all-key-lost-3
Load CAS3 eeprom

The current data is CAS for encrypted version data. Click on NO and don’t decrypt the ISN.

CGDI BMW display VIN and CAS ISN code
Copy the ISN code
Go back to CGDI function menu

Select CAS3 Key Match

cgdi-bmw-cas-all-key-lost-7 cgdi-bmw-cas-all-key-lost-8
Load CAS data

Select a unused key position and Generate Dealer Key

Choose Manually enter a known ISN
Paste the ISN code here, press Next

Place the blank key into CGDI key programmer

If the current programmed key is a smart key, the key will be locked.

Program key success. The key is locked.

2.Test CAS4 All Keys Lost


In Tango key programmer,  select BMW->Cars-> CAS4



Upload CAS4 dflash data


Detected CAS4+ Type


Select I have DME ISN


Tango asks to enter a DME ISN code to continue


Go to CGDI BMW, select BMW Data Modify->CAS4 type


Load CAS4 dflash data

The current data is CAS for encrypted version data.
Press Yes to decrypt the ISN



Paste the ISN code to Tango corresponding area

Select a key position and write key.