The solution to abnormal display after updating K518ISE

The Solution to abnormal display after updating Lonsdor K518ISE Key Programmer.

Problem: Click “Immobilizer” button after updating the device, it skips to below interface:
13-1
Step 1: After rebooting the device, please press and hold the setting and return buttons(in below red box) simultaneously for few seconds..
13-2
Step 2: The following interface appears, please click “uninstall APK” button in the red box, and wait for few seconds.
13-3
Step 3: It skips to below interface, please click “OK” to continue.
13-4
Step 4: The following interface appears, please click the button in the red box to install factory-set/default APK.
13-5
Step 5: Please wait for about half a minute. The factory-set APK is installed and initiates automatically. Then input the password on boot, and click “OK”. It skips to below interface, click “update” in the red box. Remember to reboot the device after updating. You can use it normally now.
13-6
If you want more information about our products, please visit our website www.cnautotool.com

How to update Lonsdor K518ISE kernel

Why do you need update Key Programmer Lonsdor K518ISE for the hibernation function?

Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in summer when it’s hot

How to update Lonsdor K518ISE hibernation function?

Here you go…

Device: Lonsdor K518ISE Key Programmer

Condition: for all K518 devices with working normally

New released: Added Hibernation function; Kernel update supported

Version: K518 APK V1.5.25

Preparation for Update:

1.  Power on the Lonsdor machineor keep the battery level over 80%.
2.  Make sure wifi network works goodand the Lonsdor machine can receive signal well;

Update steps:

1.  Click [One key update] and skip to below interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.

15-1
15-2 15-3

2.  After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].

3.  Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.

15-4 15-5

4.  Click [Install]after updating the kernel file. And the device will reboot to install kernel.

15-6

5.  Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.

15-7 15-8 15-9

6.  The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.

15-10

7.  Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .
15-11

8.  The benefits for update: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in summerwhen it’s hot.

Done!

Lonsdor K518ise can’t be connected vehicle solution

This post if for those uses with Lonsdor K518ISE failed to connect the machine to any car listed in K518ISE vehicle list. It is possible the OBD cable, or little chance due to the device.

OBD test cable testing method:

Step 1: Unplug the K518ISE main unit and turn it off

Step 2: Connect the DB25 cable(OBD cable) to k518ISE key programmer main unit, using a multimeter and switch to the diode stalls

Pay attention that there are 3 connectors on the OBD cable:

Connector 1: connect K518ISE OBD port;

Connector 2: connect KPROG adaptor

Connector 3: connect the vehicle OBD port

10-1

Step 3: Use the red pen to touch the metal part(as shown in pic 2 in red)

10-2

Step 4: Use the black pen to test the resistance of each pin of the vehicle connector (As shown in pic 3) , make sure that you hold the vehicle connector in the way just as the pic shows:

10-3

PIN 1 and 8 should have no resistance; PIN2,3,4,5,6,7,9,10,11,12,13,14,15,16 should have resistance.

If all have no resistance, then it will be DB25 cable has problem; if the measurement is all as it supposed to be, and the car models(those K518ISE supported models from CnAutotool.com) still can’t be connected, then you will need to send back the DB25 cable and the main unit for Lonsdor to check(if so, let us know, and we shall talk together about the solution and details)

Lonsdor K518ISE Program Ferrari 458 Remote Key

Lonsdor K518ISE Key Programmer support Ferrari 458,F12,F149 key programming. Here is a case about Lonsdor K518 program Ferrari 458 remote key.

Device: Lonsdor K518ISE key programmer

Key type: Ferrari 458 remote

Test procedure:

Step 1: Backup immo data

Step 2: Program key

Step 3: Program remote

Test result: success!

Detail steps check the photos:

Choose Ferrari Brand

20-1

Choose The car model 458

20-2

Choose Immobilizer

20-3

Choose Program remote

20-4

Show the detail info and read the data

20-5

20-6

20-7

Backup the data

20-8
20-9

Star to Program key and enter the pin code to program complete
20-10

20-11

20-12

20-13

20-14

Then Program remote

20-15

20-16

20-17

20-18

20-19

20-20

Obd2 Key Programmer lonsdor k518ise program ferrari key

Success.

How to Use Lonsdor K518ISE for The First Time

Before using Lonsdor K518ISE key programmer, you need first of all to set WIFI when you turn on the device, then go through the registration&activation process, make sure well connection between the device, OBD cable and the vehicle under proper circumstance.

Lonsdor K518ise Operation detail steps:

First time to start Lonsdor K518ise, please set the network (connect available WIFI).

After networking, the system will automatically updated to the latest version. There are 3
ways of system update:

1.One key update: quickly update the new added or modified functions.
2.APK update: this is used when the APK is updated.
3.Registration & activation

After Lonsdor K518ise from www.cnautotool.com system updating, you need go to registration&activation. For new user, click Registration, input user name(email), name(min 2 char), password(min 6 char), email verification code and click YES to complete registration(if interrupted after registration is done, you will go to the System update–Registered user to proceed). Then go to Activation confirmation to continue.

After confirming activation, it will enter into Setup password interface, please set 6-digit numbers as your startup password. Then after information verification by Key Programmer Lonsdor (5-30 minutes, you can check the progress by clicking “Refresh” ), you will required to re-enter the password to verify, when you get the notification that verification successful, the whole process before using the device is complete.

Lonsdor K518ise review by Turkey locksmith

I am locksmiths from Turkey and user Lonsdor ..

I am not satisfied,Because 2008 Hyundai gets pin code not take..
2009 Hyundai accent era not take pin code.

need some cars model to Lonsdor menü!
for example :
volkswagen
It is write models our ,you can write indicator model who is not know it….

I am glad some cars model ok..
yes ford very good
and chery good ……

Lonsdor K518ISE FAQ in Feb

Q:Can Lonsdor K518ise program all key lost dahatsu sirion 2015?

A:No

Q:hi I would like to know if this Lonsdor k518ise Suport 2009 Toyota Prius all key loss??

A:Yes

Q:Can it read pincode for Chevrolet Sonic, Cruze, Colorado, Orlando and Trailblazer with remote flip keys?

A:Yes

Q:Could we clone or program a used key, or only the original one? To be usable again on another car?
And What About the Odometer Adjustments, it also has an access on Volvo Cars? If yes could you please send me a demonstration how to use it ?

A:You can program the used key can use if the used key can clear the data. Lonsdor K518ise can’t support Volvo odometer correction.

Q:Can the Car Key Programmer K518ISE tool do all key lost for Toyota G chip and H chip?

A:Yes

Lonsdor K518ISE Update American car models list

1.Lonsdor K518ISE Update American car models Saturn on .

Detail update informaiotn:
Saturn Astra 2008-2009 Immobilizer
Saturn Aura 2006-2009 Immobilizer
Saturn Outlook 2006-2008 Immobilizer
Saturn Relay 2005-2007 Immobilizer
Saturn Sky 2008-2009 Immobilizer
Saturn Vue 2008-2009 Immobilizer

20-1

2.Lonsdor K518ISE From CnAutotool.com Update American car models PONTIAC

Details Update information:
PONTIAC Aztec Immobilizer
PONTIAC Bonneville Immobilizer
PONTIAC G3 Immobilizer
PONTIAC G5 Immobilizer
PONTIAC G6 Immobilizer
PONTIAC G8 Immobilizer
PONTIAC Grand Prix Immobilizer
PONTIAC Montana Immobilizer
PONTIAC Pursult Immobilizer

20-2

3.Lonsdor K518ISE Key Programmer Update Chevrolet supported car models and functions

Detail Key Programmer Lonsdor K518 update information as below:
Chevrolet Cavalier Immobilizer
Chevrolet Colorado IMMO Without smart
Chevrolet Colorado IMMO With smart
Chevrolet Zafira 1999-
Oldsmobile Aurora Immobilizer
Oldsmobile Silhouette Immobilizer

20-3

4.Lonsdor K518ISE Buick Update information:

Buick Envision Smart key 2017-
Buick Excelle -2012 Remote Type 2
Buick Excelle 2013- Immobilizer Type 2
Buick GL8 2011-2016 Smart key Type 2
Buick Lacrosse -2016 Immobilizer Type 2

20-4

5.Lonsdor K518ISE Update Maserati and Jeep

Detail Update information:
New Maserati read new pattern of Pin code via OBD
2014-Jeep Grand Cherokee -Read PIN code via OBD
2013-MG6 read PIN code via OBD

20-5

6.Lonsdor K518ISE key programmer free update Suzuki and Isuzu car models and functions

Detail update information:
Suzuki Swift 2015- Immobilization
Suzuki XL7(USA)2007-2009 key programming
Isuzu TF IMMO 2008-2012
Isuzu MU-X Type 2 smart key programming
Isuzu D-MAX Type 3 smart key programming

7.Lonsdor K518ISE Key Programmer Update Fiat Group supported vehicle list

Lonsdor K518ISE Fiat Update info:
Fiat Bravo Immobilizer
Fiat Palio Immobilizer
Fiat Perla Immobilizer
Fiat Ottimo Smart key
Fiat Viaggio Smart key
Fiat Viaggio Fobik
Fiat Freemont Smart key
Fiat Siena Immobilizer
Fiat Ottimo Fobik
Fiat FIORINO 2008- Immobilizer
Fiat DOBLO 2000- Immobilizer
Fiat FIORINO 2014-2015 Immobilizer
Fiat IDEA 2004-2012 Immobilizer
Fiat LINEA 2004-2012 Immobilizer

Lonsdor K518ise Key Programmer Free update Fiat Series 2
Fiat PALIO 2000-2003 Immobilizer
Fiat PALIO 2004-2012 Immobilizer
Fiat PUNTO 2008-2014 Immobilizer
Fiat STILO 2002-2006 Immobilizer
Fiat 500 2007- Immobilizer
Fiat ALBEA 2002- Immobilizer
Fiat BRAVO Immobilizer
Fiat CROMA 2005-2007 Immobilizer
Fiat DOBLO 2005-2009 Immobilizer
Fiat DOBLO 2009- Immobilizer
Fiat DUCATO 2006-2012 Immobilizer
Fiat DUCATO 2012-2013 Immobilizer
Fiat FIORINO 2008- Immobilizer
Fiat SIENA 2002-2008 Immobilizer

20-6

8.Lonsdor K518ISE key programmer Free Update Porsche car list

Detail update car list and functions:
2005-2010 Porsche 911 key programming
2005-2010 Porsche 997 key programming
2005-2011 Porsche Boxster key programming
2005-2011 Porsche Cayman key programming

20-7