Xentry Software for Mercedes Benz User Tips

Mercedes Benz Diagnostic Tool 02020.12 release! Support Mercedes Benz Car & Truck diagnosis and programming till 2020. MB Star DAS/Xentry diagnostic Software with MB subscription Support SCN Online Coding Function as well , compatible with SD connect C4/ C4 plus and C5.
Softwares list:
1. DAS 2020.09: the automatically Diagnosis Assistance System
2. Xentry 2020.09: New software released by Bennz Company after 04/2009 by diagnosis new cars.
3. WIS net 2020.06:Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
4. EPC.net 2018.11:Electronic Parts Catalog
5. ST Finder:Part Location Finder options: 2008 and 2016
6. STARUTILITIES :the movement management system and self-test
7. SD MEDIA 2014
8. PL72
9.HHT Software for old cars
10.Engineer version Vediamo updated to V5.01.01 ,Engineer version DTS updated to V8.16.015,Upgrade to the latest version of 2019 data
1) Fix the error that Mercedes-Benz DAS cannot directly call WIS
2) Join the DAS sedan smart offline programming
3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo
4) Join DAS special function password-free access PKW and SMART
5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline
6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit
7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function
8) Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly
9)Add DAS 212,207 prototyp model
10)Add Xentry special features and the VeDoc calculator($53 for activation)

DAS Special Functions
1. DAS Special Function Password Free PKW and SMART
purpose:
when you do special functions, e.g AB or ABR ecu in DAS W204, you are asked to insert password. With this patch, you can enter any character, minimum one and F2 to continue.

2. Audio Video Navigation and telematics – HU Exchange Audio 50 to COMAND password free
purpose: No password required, F3 to continue.

3.Audio Video Navigation and telematics – add Dev menu in DAS COMAND APS menu
purpose: Add developer menu in DAS Comand APS menu

4. TRANSMISSION or GETRIEBE – EGS1 Special Function password free
purpose: No password required, F3 to continue.

5.TRANSMISSION or GETRIEBE – EGS2 Diagnosis Routine password free
purpose: No password required, F3 to continue.

6.DAS Deutsch – TRANSMISSION or GETRIEBE VGS3 SonderAbläufe Sonderfunktionen password free
purpose: No password required, F3 to continue.
This unique menu only if you use DAS in Deutsch (German language). Cmiiw, this is like eeprom dump special function.

7.Adding 204 in DAS STANDALONE

purpose: Add 204 in DAS Standalone. You can do variant coding in development menu with language (in Deutsch) that are more friendly than vediamo, or adaptation or actuation that are password protected in 204 xentry. I ‘facelift’ the menu and delete a disturb file compare to the one which floating around. The disturbed file causes ‘data missing’ error in diagnostic DAS vehicles that are missing definition because of the use of older def file.

8.W164 DAS Password for Tailgate special function
purpose: No Password Required, press F2 to continue

jaxone quote:
“We replaced a Rear Sam Module (bought NEW module from Mercedes) for a ML 320cdi (164) as the old one went in fumes of smoke because of water damage.
Module installed and coded and everything is fine except the height of the tailgate (hydraulic).
When I want to make adaptation of tailgate (in REAR SAM), DAS will come and ask for a password for this function.”

9.212 PROTOTYPE FOR XDOS DAS Standalone ver 0.8
purpose:
– Diagnose 212 using XDOS DAS Standalone.
– No cbf conversion error like the one that floating in internet/forum
– Several error fixes for 212 (not fully yet. will be added later)
– Includes old prototype cbf (without seedkey?)
– ability to add/expand Development Data ourselves

10,ADD SMART SAM 450 & 452 Extra Functions for power users
purpose:: Add extra functions: Writing VIN & Development Status (inside control unit adaptation).

11.ADD SMART 451 Special Functions for power users
purpose:
– Add Development Data & Development Data (inside control unit adaptation) SAM451
– Add Development Data & Extra Coding(inside conrol unit adaptation) ESP451

12.ADD SMART 454 Special Functions for power users
purpose: Add Development Data and Read codingstring in ESP 454

13.Suppress ALL TAN codes for Smart equipment upto 2016-09 without Qutomotive Advertisement
purpose: Suppress ALL TAN codes for Smart equipment upto 2016-09 and without Qutomotive Advertisement

14. ADD SMART 451 & 454 OFFLINE KEY TEACH-IN program key transponder key DAS 2016-12 UP
purpose:
Since Xentry 12/16 there is a new system to teach in Smart keys (BR 451 and BR 454). You don’t have the TAN input to teach in again. Smart TAN Calculator and the old csdsmart solution don’t work anymore. biggrinEAD:
Now you have to log in to daimler server. While Smart 450, 452 don’t go online and also do not need TAN codes.
This fix is able to teach in program key transponder key Offline & don’t need TAN codes too for Smart SAM451 & ETACS454.

15. ADD SMART 451 & 454 OFFLINE SAM Assignment DAS 2016-12 UP
purpose: SMART 451 454 OFFLINE SAM Assignment 2016-12UP

16.Special Function Password Free Transporter
purpose: Special Function Password Free for Transporter

17.DAS PKW/SMART/TRANSP Offline Programming & Online/Offline Entry of Retrofits & Modifications
purpose: to update ecu firmware & Offline/Online Entry of Retrofist & Modifications

Note:
Change to original mode when update addons. Daimler always update to increase security in Online Programming!!!
If not, the offline patch will get error when using.

18. Nox Torque Limit Setting (FR/CPC0) with correct New FDOK XT
purpose:
– Nox Torque limit Setting: No need FDOK encrypted random number, F3 to continue
– Calculate correct nueu-FDOK internally, and change the encrypted random number to correct one in memory
– Added value: UNLOCK Legal speed limit direct edit without going to special function

19.Erase SCR/ADBLUE fault code (in MR) with correct New FDOK XN
purpose:
– Erasing of emission-relevant (SCR/ADBLUE) fault code: No need FDOK encrypted random number, F3 to continue
– Calculate correct nueu-FDOK XN internally, and change the encrypted random number to correct one in memory

20.NFZ SonderFunktion Password Free
purpose: password free for NFZ when doing SonderFunktion (Flash/Programming)

21.Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP
purpose:
Patch original files from XDOS 2018-07:
– Added Offline EOL & VMAX ALL LKW (OBD1 & OBD2) for DAS 2014-12UP
– Added Deleted VIN function
– Avoid MR Manipulation because of change VIN

22.MR1_96 Conversion to emissions standard ‘Euro 3’ download + Flash Data Complete
Purpose: Offline downgrade MR FLASH memory from Euro 4/5 to Euro 3 to disable AdBlue

23.ADM2 & ADM3 Unlock speed
purpose: Speed limit Read/Write on ADM2 and ADM3 on Kamaz, MAZ, Industrial motors, Crans, Combines

24.CPC4 Unlock speed
purpose: New IMO replace its old ADM2/3 with new CPC4 – TC1796. This will unlock speed limit Read/Write on Kamaz, MAZ, Freightliner,…

Software display:

30-1

30-2

30-3

30-4

30-6

30-7

30-8

30-9

30-10

30-11

30-12

30-13

 

Be the first to comment

Leave a Reply

Your email address will not be published.


*