Problem:
Hi, i recently purchased the Xtool x100 pad2 tablet key programmer and i love it. But i think i have a battery problem. I left it fully charged and 1 day later i tried to use it and it was dead. I also noticed that the battery drains very quickly when in use, from 100% to 60% in about 15mins. What can i do about this? Is it possible for you to fix or replace it?
Final Solution to Xtool X100 PAD II Battery Drains and Power off problem from Xtooltech engineer:
Tools required:
1pc* Static bracelet
1pc* Hot air gun (350±10℃ Temperature setup: 350±10℃)
Precautions: Please wear the static bracelet before each operation.
Procedure 1: Change C6 capacitor
Position: C6
Name: Chip capacitor
Chip specification: 4.7UF/10V 0603
1.Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor.
Disassemble The C6 Capacitor And Desolder A 4.7K 0603 Resistor
Procedure 2: Remove transistor
Position: Q14
Name: S8050
Chip specification: 0.1uF/50V 0402
1.Disassemble the Q14 transistor.
Disassemble The Q14 Transistor
Procedure 3: Change C123 capacitor
Position: C123
Name: Chip capacitors
Chip specification: 0.1uF/50V 0402
1.Replace the C123 capacitor with a 3.3K%5 0402 resistor.
Xtool X100 PAD2 Battery Drains and Power off Working Solution
Leave a Reply