Mercedes W205 Control Unit (N310) Online Coding with VXDIAG Benz C6

How-to: Benz W205 N3/10 online scn coding of control unit motor electronics MED40 for combustion engine M274 using VXDIAG Benz C6 xentry.

Procedure:

Connect VXDIAG C6 Benz vcx plus with vehicle and computer

Turn on ignition switch

Run Xentry software in VX Manager

vxdiag-c6-benz-w205-med40-coding-1

vxdiag-c6-benz-w205-med40-coding-2
Go to Diagnostic function

Confirm safety information and press Continue

vxdiag-c6-benz-w205-med40-coding-3

Check N3/10 control unit version

vxdiag-c6-benz-w205-med40-coding-4

Check if  fault code exists, if yes, clear error codes.

vxdiag-c6-benz-w205-med40-coding-5
Actual values

vxdiag-c6-benz-w205-med40-coding-6

Go to Adaptations->Control unit update-> Updating of SCN coding

vxdiag-c6-benz-w205-med40-coding-7

Enable online connection for the next steps

vxdiag-c6-benz-w205-med40-coding-8

Coding of control unit MED40 for combustion engine M274 in process

vxdiag-c6-benz-w205-med40-coding-9

Resetting  control unit by VXDIAG C6 Benz

vxdiag-c6-benz-w205-med40-coding-10

Switch off ignition then switch ON

vxdiag-c6-benz-w205-med40-coding-11
Check variant coding

MED40 control unit coding complete

Enter repair order number

vxdiag-c6-benz-w205-med40-coding-12

You are allowed to print the order report.

vxdiag-c6-benz-w205-med40-coding-13

Done.

Be the first to comment

Leave a Reply

Your email address will not be published.


*