How to use NCS Expert for BMW E65 VO change with BMW ICOM ?

BMW ICOM is the famous diagnostic tools with strong functions work for BMW vehicles .

Today lets check the steps how to change VO using NCS Expert with BMW ICOM , BMW ICOM Next and so on
Test Car model is BMW E65
NCS Expert Interface (BMW ICOM NEXT Recommend)

Before NCS can be used a Profile must be loaded.

Select File/Load Profile from top menu bar

Select “Profile incl then OK

Once a profile is loaded the bottom buttons become selectable

Select F1 to read vehicle data first.

Select F3 to read FA from ECU.

This needs to be done before any coding can be performed.

Select F3 to read FA from ECU.

This needs to be done before any coding can be performed.

Choose the ECU to read the Vehicle Order from.

In this example “CAS” Select OK


The Model, VIN and VO should then be displayed

Select “F2” to modify VO

Select the model you are working with.

For this example “E65” BUT CHOOSE R56!!

Select OK once highlighted

Verify that the VIN is correct.

Note: last digit is a checksum Select OK

Enter SA or Service code Then select “Add”

“Enter FA” SA codes must begin with $

Service Codes Must begin With +

Example Enter $655 Select “Add” Scroll down To check

Example Enter +EVER

Select “Add” Scroll down to check.

Select OK


After you have successfully changed the VO you will see this screen

Select F6 (Back)

Select F4 Process ECU

Select the CAS

Select F2 Change job

Select “FA_WRITE”

Verify Jobname is “FA_WRITE” and CAS is ECU selected

Select F3 Execute Job

Select F1

Change ECU to select FRM

This will ensure that new VO is written into CAS and FRM

Select “FRM”

Verify Jobname is “FA_WRITE” and FRM is ECU selected

Select F3 Execute Job

Done! NCS Expert successfully changed the VO!

More request ,  you can contact us directly : sale@cnautotool.com

Add a Comment

Your email address will not be published. Required fields are marked *