How to Configure MB SD Connect C4 DoIP Multiplexer?

To use new MB Star SD Connect C4 DoIP diagnostic scanner, you need to configure it first.  Follow steps below to configure SD Connect C4 DoIP multiplexer:

configure-mb-sd-c4-doip-1

1. Go to local network connection
configure-mb-sd-c4-doip-2

2. Press Properties
configure-mb-sd-c4-doip-3

3. Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue

configure-mb-sd-c4-doip-5
4. Enter IP address

IP address: 172.29.127.24

Subnet mask: 255.255.0.0

configure-mb-sd-c4-doip-5

5. Click on Advanced

configure-mb-sd-c4-doip-6

6. Click on Add to configure DoIP IP address

configure-mb-sd-c4-doip-7

7. Set DoIP IP address to 169.254.0.** (i.e 169.254.0.45)

8. Click on OK to finish configuration.

FYI:
The new SD connect C4 DoIP (1:1 clone of the original) is able to work for DoIP.
It’s the only C4 that supports ethernet communication (DoIP).
Have tested no issues on new mercedes with doip.

Be the first to comment

Leave a Reply

Your email address will not be published.


*