CGDI BMW “This Version FEM/BDC Not Supported, Update Your FEM/BDC” Solution

Sometimes you are trying to program keys to FEM/BDC system, CGDI Prog BMW will give you error  “This version FEM/BDC is not supported, pls update your FEM/BDC”. This does not mean this ECU is not supported. You can enable it by FEM/BDC programming and coding.
cgdi-bmw-update-fem-solution-1 cgdi-bmw-update-fem-solution-2

Here’s the proper solution to this problem.

Connect CGDI BMW with vehicle

cgdi-bmw-update-fem-solution-3

Select BMW F/G Series Programming

cgdi-bmw-update-fem-solution-4

Choose FEM_Body and Program

cgdi-bmw-update-fem-solution-5 cgdi-bmw-update-fem-solution-6

cgdi-bmw-update-fem-solution-7 cgdi-bmw-update-fem-solution-8

CGDI BMW progam ecu success
cgdi-bmw-update-fem-solution-9 cgdi-bmw-update-fem-solution-10

Go to BMW F/G series Coding

cgdi-bmw-update-fem-solution-11

Select FEM_Body and Backup coding

cgdi-bmw-update-fem-solution-12

Backup success

Select Coding

cgdi-bmw-update-fem-solution-13

Coding success

(Here’s CGDI BMW F-series programming and coding guide with English menu)

Now go back to FEM/BDC Key Match

cgdi-bmw-update-fem-solution-14

This time you can program FEM/BDC with CGDI Prog no issue.

cgdi-bmw-update-fem-solution-15 cgdi-bmw-update-fem-solution-16
Detail FEM/BDC key programming procedure, please check:

BMW FEM/BDC Add Key and All Keys Lost with CGDI BMW

Be the first to comment

Leave a Reply

Your email address will not be published.


*