What is funtion of Porsche Piwis II Engineering Mode ?

Piwis II Porsche diagnostic tool, Porsche Piwis 2 with regular version and Piwis 2 engineering mode, what’s the Piwis tester ii developer mode spcial? what can the Porsche piwis II engineering mode do? Here CnAutotool.com share PIWIS II developer mode function as following help to customer choose it.

The software version is:V18.100

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

1

 

What is funtion of Porsche Piwis Tester II Engineering mode ?

 

  1. Start/stop”LAST MODE”wait for stopping the engine and change memory
  2. Spoiler”lessen time when the car starts
  3. Spoiler”fixed”
  4. Spoiler”change angle”
  5. Change VO code
  6. Close Air Mercury
  7. Upgrade power
  8. Remove the tire pressure sensor
  9. Install reversing camera
  10. Install USB/BT
  11. Close the seat belt warning
  12. Change CDR/PCM operation interface
  13. Air condition memorization
  14. Start CDR_AUX
  15. Open the PCM function
  16. Manually set codes
  17. Automatically set codes
  18. Manually do programming
  19. Automatically do programming

 

PIWIS II Developer Mode software display:

2 3 4

 

 

 

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year for Porsche car models

Autel Maxidas DS808 Full Set Questions and Answers (FAQ)

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/12-1.jpg

Here a collection of Autel MaxiDas DS808 Full Set Questions and Answers, hope it helps.
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/12-2.jpg

Question: Can you use this to program new keys
Answer: Yes you can reprogram keys with this tester

Question: Is it true that this model is no longer updateable? I was just going to purchase one,but if that is the case it is worthless
Answer: I can only tell you that I updated mine for Mercedes and chevy right after I registered it

Question: can you program the abs module with this
Answer:DS708 can not program the abs module.Only maxisys pro can do it

Question: Is it availalable with standard package which has less adapters and cables?
Answer:Yes, we have standard package Autel Maxidas DS808.

Question: Is it difficult to register this device? And can it support Spanish?
Answer: Registering the device was easy. You simply go to autel’s website and set up an account. Once you do that you take the registration code/passcode from the scan tool and register it on the website. You then make sure that the scan tool is hooked up to your wifi which is setup in settings. Then you are ready to update the scan tool with the latest software.
Changing the language settings is also easy. You simply do that in settings as well and have multiple different choices. I do know Spanish was one of them. I returned mine because it could not code or reset any adaptaions in any modules on my vehicles. My vehicles are about 15 years old and I think the support on older vehicles goes away with the updates. It probably has more capabilities on the newer vehicles. I should have purchased one of these 5 years ago and never updated it so that the scan tool could retain its capabilities.

Question: Can i use for other connections besides scan tool obd2?
Answer: Yes, this is full set version, it is included with many cables and adapter which are not OBD2.

Question: What is the head set used for with the scan tool
Answer:It’s not used with the tool is just a free give away to get you to buy an outdated tool that according to autel there will be no more updates after Dec 2017. I sent it back because I couldn’t get it to update or more like it removed software during update which is another common complaint on their site. I feel it’s dishonest to sell things claiming a year full updates and it’s not a year is much less than a year but I guess China isn’t afraid of a class action for fraud.

Question: Does it do tire pressure and how about the free headset?
Answer:It will perform limited tire pressure functions (i.e. Read it) if the ECU Programmer allows it via OBD II connector. The free head phones are surprisingly very good, they are comfortable, easy to use, battery lasts a long time and rechargeable.

Question: Does this tool have bi-directional control and diagnostics for the Body control Module?
Answer: Yes, of course, it can support it.

Question: can it program tpms sensor
Answer: It can put the car into programing mode but you will need a tpms sensor tool

Question: Can it do a power balance on a ford 2006 f350 diesel?
Answer: Yes, it can be supported.

Question: can i use in Spanish language ?
Answer: may we know what’s your serial No. of your DS708? To change language, you need to download all the software again, so your device needs to be within the updating period. If it is still within updating preriod, please provide us the serial No. and we can ask Autel to authorize Spanish for you.

Question: can this unit be used to relearn the idle, on a 2010 chevy 1500 silverado z71, auto trans, 5.3
Answer: Yes, it can be supported.

Question: Dose it work on 24v truck
Answer: Mine is a 708 and is 12 volt only. You may have to get one for heavy duty trucks, depending on the make. Sorry I couldn’t help.

Question: Hello Can this change the settings on a 2008 GM product to turn the cruise control on in the body control module?
Answer: It can support the following functions:

Cruise Control Options

Cruise Control Cycle

Cruise Control Options

Cruise Disable

Cruise Enable

Cruise Inhibit

Question: Will this test the abs module on a 1995 chevy k2500 suburban with the diesel engine or can you recomend one that will?
Answer: on you need older otc

Question: Can you program BMW e63 keys
Answer: Sorry, it can’t support to program BMW keys.

Question:Does this scanner do check engine lights abs lights and show live data??
Answer: Yes, DS708 can do it.

Question: Can u set Dist timing on 97 chevy
Answer: Yes you can, it’s listed as knock retard in degrees. Set it close to 0 as you can get.

Question:Hi, does it have Australian vehicles?
Answer: only the Australia version DS708 can test Holden vehicle.

Question: Will this do as much as a snap on scanner?
Answer: You can search on YouTube where guys compare the different scanners between Snap On, etc.

Question:Ds708 have any advantage over the 808?
Answer: DS808 is much more advanced than DS708.The hardware of DS808 is more advanced, and DS808 covers more vehicles, and the vehicle software of DS808 Kit has updated to 2016.

Question:What kind of modules can I access with this? Thank you in advance.
Answer: It is ccomprehensive diagnostic scanner, you can use it to access all ECUs and also special functions, like DPF, SAS, EPB, Key matching etc.

Question: What’s the difference between ds808 and ms906?
Answer: DS808 is a smaller and stripped down version of MS906. The two models have the same function in software, but different hardware configuration. DS808 is configured with smaller screen and smaller battery, but DS808 is priced about $250 less than MS906.

Question: Can you increase your idle rpm with this scanner?
Answer: Do you mean the idle relearn function? It can be supported. But for some vehicles, the idle can be relearned by manual. So in order to confirm it, it is better you can provide us the detailed vehicle information, like Vehicle, year and Vin No.

Question: Will it diagnose suspension error indications?
Answer: Yes, DS708 can do it. Any other doubts welcome to contact me at any time.

Launch X431 Pro Mini Bluetooth VS X431 Diagun, X431 Pro Mini Wins

Launch X431 Pro Mini Bluetooth VS X431 Diagun, X431 Pro Mini Wins in features, function, vehicle coverage, parameters, etc.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/5-1.jpg

X431 Pro Mini Wins X431 Diagun in highlights:

1.Android-based vehicle trouble diagnostic tool
2.Full car model covering prevailing vehicle models of Asian, European, American and Chinese
3.Full system vehicle trouble diagnosis
4.Wi-Fi connection
5.Bluetooth communication between the VCI module and X-431 PRO MINI
6.Perform remote diagnosis: configures X-431 PRO MINI as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.
7.One-click update online for 2 years free: Lets you update your diagnostic software more efficiently. To obtain better function and update service, advise you update the software regularly.
8.OBD diagnose function: Reading DTCs, Clearing DTCs, Reading Data Stream and Actuation Test
9.Special Functions: Oil Reset Service, Steering Angle Calibration, Electronic Parking Brake Reset, Battery Register / Battery Maintenance, ABS Bleeding, Electronic Throttle Position Reset / Learn, Diesel Particulate Filter (DPF) Regeneration, Tire Pressure Monitor System Reset, Gear Learning, Immobilizer Matching and Fuel Injector Coding

X431 Pro Mini Wins X431 Diagun in vehicle coverage:

X-431 PRO MINI from CnAutotool supports all electronic control systems on 12V EFI models, incl. more than 150 European, American and Asian models like Maserati, Ferrari, Rolls Royce, Bentley, Mercedes-Benz, BMW, Audi.Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. It achieves full car model and full system vehicle trouble diagnosis.

X431 Pro Mini Wins X431 Diagun in features:

1.Accurate: X-431 PRO MINI performs diagnosis (fault code, data stream, action test and other functions) as the dealership.
2.Quick: can perform full system diagnosis and one button to clear codes at a high speed
3.Record and playback Data Stream: Record and playback the data stream help you analyze the trouble when driving and solve it.
4.VINSCAN: Automatic scan (OBD VIN) and manual input (INPUT VIN) are available.
5.View History: The History function provides a quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch.
6.Maintenance Help: Including: How-to Videos, operation skills and user manual, Q&A, Quick start guide etc.

X431 Pro Mini Wins X431 Diagun in parameters compared:

Launch X431 Pro Mini Technical Parameters:
Operating system: Android 5.1
Processor :Quad core 1.3 GHz
Memory: 2GB
Storage:16GB
LCD screen: 6.9 inch with a resolution of 1280 x 720 pixels
Camera :Front-facing 2MP camera + rear-facing 5MP camera
Battery :3.7V/3000mh rechargeable polymer lithium battery
Connectivity : Wi-Fi: WLAN 802.11b/g/n ,Bluetooth: Bluetooth 4.1
Working temperature: 0℃ ~ 45℃
Storage temperature: -10℃ ~ 50℃

VCI module Parameters:
Working voltage 9 ~18V
Average working current About 85mA
Standby current About 55mA
Working temperature -10℃ ~ 55℃
Storage temperature -20℃ ~ 70℃
Relative humidity 20% ~ 90%

DBScarⅢ adapter parameters:
The brand-new DBScarⅢ adapter is small size and can be easily plugged into the handset to diagnose and matching, it tests car models stably, it supports
CAN diagnosis also USB data transfer.
Size: 69 × 40 × 18 mm
Operating voltage: 9V DC – 18V DC
Test voltage: DC12V
Typical power consumption: ≤2W
Bluetooth distance: 100 m
Connectivity: Bluetooth + wired
Operating temperature: -10℃to 50℃
Red Indicator: Turns red when connected to power supply;
blue Indicator: Turns blue then wireless Bluetooth work;
USB work: Turns green when the connector is connected to the USB cable

X431 Pro Mini Wins X431 Diagun in handset

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/5-2.jpg

1 VCI module
2 Reset hole
3 Rear camera
4 Camera flash
5 Slot for VCI module for housing the VCI module.
6 POWER/Screen lock key In Off mode, press it to turn X-431 PRO MINI on; In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7 Carry strap
8 Air intake vent
9 USB/Charging port To connect to the power adaptor for charging.
10 Microphone
11 LCD screen
12 VOLUME +/- Key To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen.
The captured snapshot is saved in the “Screenshots” folder.
13 Speaker
14 Front cameras
15 Earphone Jack

Launch X431 Pro Mini package:

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/5-3.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/5-4.jpg

(Guide) SuperOBD SKP-900 SKP900 program Honda Accord 2015 new key

This is an operation guide to program Honda Accord 2015 new key by using SuperOBD SKP-900 SKP900 Key Programmer. Hope it helps!

First choose “Immobilizer” on main menu, select “Honda” then “System Type” then “Immobilizer 3”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-1.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-2.jpg
Next you will see Vehicle Selection, press Enter button to go on. It will remind you to turn ignition on. Turn on ignition and wait about 1 minute for system adapting.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-3.jpg

After that choose “Add 1 pc key”

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-4.jpg

Turn on ignition SKP-900 show “Programming” then turn off ignition. Unplug the original key and insert the new key in 15 seconds.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-5.jpg

Then use the new key to turn ignition on then off. Turn ignition on then off again. Now turn ignition on and wait. The immobilizer indicator will be off, press the Enter button to confirm.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-6.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-7.jpg

Turn off the key and turn it on back. It will show “Adapt Key Success”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/25-8.jpg

Now car start OK and remote work with this new key programmed by SKP-900 key programmer!