How to Configure MB Star SD Connect C4 DoIP Multiplexer?

The new SD connect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip.

To use new MB Star SD Connect C4 DoIP diagnostic scanner, you need to configure it first.  Follow steps below to configure SD Connect C4 DoIP multiplexer:

1. Go to local network connection

2. Press Properties

 

3. Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue

 

4. Enter IP address

IP address: 172.29.127.24

Subnet mask: 255.255.0.0

 

5. Click on Advanced

6. Click on Add to configure DoIP IP address

 

7. Set DoIP IP address to 169.254.0.** (i.e 169.254.0.45) 

8. Click on OK to finish configuration.

 

FYI:

The new MB STAR SD connect C4 DoIP (1:1 clone of the original) is able to work for DoIP.

Its the only C4 that supports ethernet communication (DoIP).

Have tested no issues on new mercedes with doip.

All kinds of informations on MB STAR will be displayed here.

Why will you choose Xentry connect C5
23-1-1-1-1
Original Plan 1:1 Copy Mercedes Wifi Xentry Connect C5 multiplexer For Mercedes Car And Trucks.
After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.
Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1, somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.
Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.
So , we suggest you buy Mercedes Benz DoIP Xentry Connect C5 MB Star C5 Plus Panasonic CF52 Laptop from OBD2TOOL , We will install and activate for you ready to use. What’s more, this package offer saves you money than buying them alone.
After all, there are many reasons to choose Xentry C5 Connect. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you will not lag behind the progress. Each client of of yours, seeing with his own eyes ,that you are in your work using the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists

MB SD C4 with EVG7 manual incl. FAQ , setup etc

Tips & Warning: Chrysler Diagnostics & Programming by MicroPod 2
What you can read in this post:

1.Solution to EVG7 Blue Screen working with SD Connect C4

2.Battery and hard disk disassembly and installation

3.Find out and use the on-screen keyboard.

4.The method to use EVG7 U disk.

Here we go one by one

Part 1: Solution to EVG7 Blue Screen working with SD Connect C4

Look this image of EVG7 Blue Screen:

MB SD C4 with EVG7 manual incl. FAQ , setup etc1

Solution:

1.Press the “On” button to turn on machine. Then press “SAS” button to enter bios settings.
MB SD C4 with EVG7 manual incl. FAQ , setup etc2

2.Change Sata startup mode.

MB SD C4 with EVG7 manual incl. FAQ , setup etc3

3.IDE: for Windows XP

AHCHI: for WIN7, 8 etc.
MB SD C4 with EVG7 manual incl. FAQ , setup etc4

4.Use the shift key to save and exit.

Restart the EVG7 and the Blue screen will disappear.

MB SD C4 with EVG7 manual incl. FAQ , setup etc5

Part 2: Battery and hard disk disassembly and installation

This upper left corner is the position of battery, the lower right corner is the position of the hard disk. Before

installing, please remove all the screws on the back cover.

MB SD C4 with EVG7 manual incl. FAQ , setup etc6

1.Hard disk disassembly and installation

Open the cover of hard disk.

MB SD C4 with EVG7 manual incl. FAQ , setup etc7

Remove the hard drive bay

MB SD C4 with EVG7 manual incl. FAQ , setup etc8

Take out the hard disk and the bay.

MB SD C4 with EVG7 manual incl. FAQ , setup etc9

Remove the hard drive connection cable

MB SD C4 with EVG7 manual incl. FAQ , setup etc10

Done.

Now you know how to install back, right?

MB SD C4 with EVG7 manual incl. FAQ , setup etc11

2.Battery disassembly and installation.

Disassembly:

Open the cover of the battery.

Take out the battery.

Installation:

Put back the battery and close the cover.

MB SD C4 with EVG7 manual incl. FAQ , setup etc12
MB SD C4 with EVG7 manual incl. FAQ , setup etc113
Part 3: Find out and use the on-screen keyboard.

Start – Programs – Accessories – Accessibility -On-screen keyboard.
MB SD C4 with EVG7 manual incl. FAQ , setup etc14
MB SD C4 with EVG7 manual incl. FAQ , setup etc15

Part 4: The method to use EVG7 U disk.

MB SD C4 with EVG7 manual incl. FAQ , setup etc16MB SD C4 with EVG7 manual incl. FAQ , setup etc18
MB SD C4 with EVG7 manual incl. FAQ , setup etc17

Remarks: There are stylus installation drivers and EVG7 hardware drivers in the mobile U disk. The drivers need to be installed manually

OpenShell XDOS 2017.12 issues and solutions(Collection)

Here is some FAQ( Frequently asked questions ) of the newest version OpenShell XDOS v2017.12

CnAutotool hopes it’ll help you

Here you go:

Q: X86 or 64-bit Windows? HHT-Win?

A: NO HHT win. Win x32

Q: what hard disk capacity to be used?
A: 250 TO 350 GB HDD will be ideal.
Q: which acronis boot disk to be used to install the image ?
A: Restore the Image using Acronis Premium 2014 use Acronis Universal restore
Q: which laptops do you recommend ?
A: I recommend any good specs laptop
Q: does it support mb star c3 for older cars?
A: it dose not support C3
Q: i have Chinese Mb Star Connect C5 can i use it with that?

A: I have not tried on C5 but SDconnect C4 definitely yes

Q: I can’t install on Lenovo T500, have a blue screen of death

A: You need to prepare all your computer’s necessary drivers on a USB stick so Acronis can install them in the compatibility mode at the time of unpacking to hard drive.

Q: Should i have a XDOS HDD version or SSD?

A: SDD better, runs faster and more stable.

Q: I can not install OpenShell XDOS 2017.12 on 32 bit operating system, it comes to 439 and is automatically uninstalled. Does anyone have such a problem?

A: for windows 32bit, you have to edit xentry diagnostics openshell.msi with orca. look at updated first page again.
or you can pm someone which has the file already patch.

OpenShell XDOS 2017.12 images:

30-1 30-2 30-3 30-4 30-5

30-6 30-7 30-8 30-9 30-10

How to do 2009 Benz E350 Gas tank mod reset cluster

Purpose:do Gas tank mod reset cluster on my 2009 E350.

Tool option:

MB SD Connect C4 with dell 6410 laptop(Has ssd, 4gb mem, so it should be quicker than a dell630.)

Here we go:

Found out how to reset cluster: See below part,  it’s towards the end of the post.

Gas Tank Mod (Gallons) ***Need Developer Mode***

25 (1) 25 (2) 25 (3) 25 (4) 25 (5) 25 (6) 25 (7)
25 (8)

After you hit F3 it will carry on the coding process (hit “F1” to go back)

so we can reset the ECU so coding can take effect.

25 (9) 25 (10) 25 (11) 25 (12)

So far I’m loving MB STAR Diagnostic Tool. I am going to code the car this weekend for Bi-Xenons and then code the card to accept the OEM front LED city lights. I’m doing a e55 bi-xenon retro fit to replace the stock crappy h7 halogen e55 projectors.