Know about How to use GM MDI with Toyota Techstream

 How to use GM MDI with Toyota Techstream?
Here’s the tutorial on how to use GM MDI (Multiple Diagnostic Interface) with Toyota Techstream software. This is not necessary because the MINI VCI passthru cable is very cheap for techstream.  The guide is for those who are interested in finding a good mvci alternative.
How to use GM MDI with Toyota Techstream-1 (2)
Disclaimer: You are at your risk.  We are not hold the responsibility for the damage.

Instruction:
Techstream has only 2 default pass-thru device selection options: TIS Techstream VIM and Xhorse MVCI
So first step we need to add MDI to the VIM selection.
How to use GM MDI with Toyota Techstream-2 (2)
How to use GM MDI with Toyota Techstream-3 (2)
Connect GM MDI interface with vehicle (here we use Windows 7 machine) via USB cable
MDI supports WiFi connection as well, but obviously we need to use USB connection here
How to use GM MDI with Toyota Techstream-4 (2)

How to use GM MDI with Toyota Techstream-5 (2)
Go to MDI software folder and find MDI Manager driver
Install MDI Manager driver setup
How to use GM MDI with Toyota Techstream-6 (2)
How to use GM MDI with Toyota Techstream-7 (2)
Install the GM MDI Software InstallShield Wizard
How to use GM MDI with Toyota Techstream-8 (2)
Configure USB
Power on the MDI, wait for the “beep”. Ten connect it to the PC with the USB  cable(already connected it).
Press the Configure button when ready. Configuration may take several minutes.
How to use GM MDI with Toyota Techstream-9 (2)
Finish installing MDI driver.
How to use GM MDI with Toyota Techstream-10 (2) Open GM MDI Manager on desktop
MDI is not yet connected
How to use GM MDI with Toyota Techstream-11 (2)
Open Techstream software (here use Ver. 13)
How to use GM MDI with Toyota Techstream-12 (2)
Now the MDI passthru is added to the VIM selection
Select MDI interface and press OK
How to use GM MDI with Toyota Techstream-13 (2)
Accept Windows Security Private networks and allow access
How to use GM MDI with Toyota Techstream-14 (2)
MDI not connected (require configuration)
How to use GM MDI with Toyota Techstream-15 (2)
Open GM MDI Manager on desktop again
System prompts no MDIs detected
It require to recover MDI, press Recover button
How to use GM MDI with Toyota Techstream-16 (2)
If it warns MDI software is out of date. Run Start Update
Do not unplug the MDI from the PC or remove power from the MDI during the update process.
How to use GM MDI with Toyota Techstream-17 (2)
The MDI will automatically restart when update completed
How to use GM MDI with Toyota Techstream-18 (2)
Now the MDI interface is connected
How to use GM MDI with Toyota Techstream-19 (2)
Run Techstream again
Choose MDI interface
How to use GM MDI with Toyota Techstream-20 (2)
Initialize USB communication and connecting
Check the indicators on MDI adapter
Communication is built
How to use GM MDI with Toyota Techstream-21 (2)
Select vehicle model and start diagnose Toyota.
Done.
www.cnautotool.com

Be the first to comment

Leave a Reply

Your email address will not be published.


*