How to Install VXDIAG / Allscanner VCX-Plus Multi Diagnostic Tool

AllScanner VCX-PLUS MULTI Scanner are PC-to-vehicle interface compatible with multiple oem software applications and cover multi-brand vehicles, so far the compatible car makes including PASSTHRU, PORSCHE, TOYOTA, HONDA, SUBARU, VOLVO and JLR.

To check all VXDIAG packages containing workable car makes and software applications

And no matter what diagnostic software they are, they share same computer requirements and driver installation steps on windows.

VXDIAG/ Allscanner VCX-Plus Computer Requirements
Processor: Pentium 4 / 1.6GHz+.
Memory: 2G Bytes or more.
Hard disk: 40G or more.
Display: Resolution 1024×768 or higher.
Network interfaces: LAN 10 / 100M or 802.11b / g.
Communication Interface: USB2.0 or USB3.0
Operating System: Windows XP / Vista / Win7 / Win8 / Win8.1.

VXDIAG/ Allscanner VCX-Plus Software Setup step by step
Before start to diagnose vehicle, you have to install VX Manager and driver which are stored in the CD-ROM,

1.Run VX Manager.exe to setup

2.Click [Next]

3.Select [I accept the agreement], then click [Next]

4.During installation, disconnect USB cable to the computer, then click [Next]

5.Software installation

6.VXDIAG SDK Driver installing…

7.Setup complete. The shortcut will create on the desktop “VX Manager”

Start to Use Hardware Connection
Connect OBDII cable to the vehicle 16pin diagnostic port, and USB cable to the computer.

Note: Hardware Connection

Install USB driver for Windows 7 / 8 / 8.1
The first time to connect USB cable to the computer, Windows will prompt [Installing device driver]. Windows automatically complete driver installation.

Install USB Driver for Windows XP
The first time to connect USB cable to the computer, Windows will prompt [Found New Hardware]

Please follow these steps to complete USB driver installation.
1.Select [No, not this time], then click [Next]

2.Select [Install Driver Automatically], then click [Next]

3.Please wait while the wizard installs the software

4.Complete Found New Hardware Wizard, click [Finish]

Thereafter, it will pop up the second time [Found New Hardware Wizard], same as above.

The USB Driver installed completed:
After USB driver is successfully installed, PC LED will flashing.

VX Manager
Please make sure the device is connected. Run VX Manager, The information of device will be displayed in “Device Manager”.

Perfect!

If you have any question about auto tech problem,please comment in at cnautotool.com

Be the first to comment

Leave a Reply

Your email address will not be published.


*